Sapac TL 2000 Operation And Assembly Instructions Download Page 3

 

3

Due to the fact that Tates Performance Hobbies is constantly improving the quality and functional characteristics of its products some 
details, colours, and functions may differ slightly from the images presented on the box and in the instructions.   

WARRANTY 

 

Tates Performance Hobbies guarantees that this model is free from defects both in material and craftsmanship on the date of purchase.  
This guarantee does not cover any component parts damaged by use or modification.  Tates Performance Hobbies liability will under no 
circumstances exceed the original cost of the purchased model.  Moreover, Tates Performance Hobbies reserves the right to change or 
modify this warranty without notice. 
If upon purchasing this product the buyer finds defects to the product as a result of the manufacturing process we recommend that you 
return this product to the place of purchase to exchange or refund the product. 
Given that Tates Performance Hobbies has no control over the final assembly or use of this product, Tates Performance Hobbies shall 
assume no liability for damage caused resulting from the use by the user of the final user-assembled product.  By using this product the 
user accepts all resulting liability. 
If the purchaser of this product is not prepared to accept the liability associated with the use of this product, they are advised to return 
this model within 14 days to the place of purchase. The product must be in complete and unused condition along with receipt of 
purchase at the moment of return.   

WARNINGS 

 

1. 

Never leave the model in direct sunlight for prolonged periods of time. 

2. 

Never fly this model near an AIRPORT, check with your local airport authorities for minimum distance to available sites. 

3. 

Never use this model near power lines, radio towers, or other locations where there is known high radio wave or 

 electromagnetic 

activity. 

4. 

Do not allow water or liquid to touch the model or any of the components.   

5. 

Store the model in a cool dry location as high humidity can damage the model and its components. 

6. 

Protect the model from bumps, jolts, and concussions from other hard objects as this could damage the model. 

7. 

Keep the model clean of dust, mud and dirt. 

8. 

Never place foreign objects on top of the model 

9. 

Use the model ONLY in wide open spaces that are free of people, or at your local RC flight club. 

10. 

NEVER use the model near populated pedestrian areas.  This could lead to damage of property or injury to bystanders. 

11. 

Prior to take off, always check that transmitter and receiver batteries are fully charged and are fresh.  As battery 

 

power  

decreases the quality of the radio signal diminishes and control over the model could fail. 

12. 

Please dispose of used batteries and electronic components in accordance with your municipal and federal regulations 
relating to  these types of products. 

13. 

Keep in mind that those in your vicinity may also use radio control models.  Please check prior to take off that   you are 

 

using a unique frequency to all those around you.  Not doing so may cause you and others to lose  

control of the 

 model. 
14. 

If the model does not properly respond to control inputs, land immediately and do not attempt to use the model   until the 

 

cause has been determined and fixed. 

15. 

After flying, switch off the power on the model and then the transmitter. 

CAUTIONS 

 

1. 

This product is not suitable for children under 14 years of age, adult supervision of children under this age is  

highly 

 recommended. 
2. 

This kit contains a number of small parts which are fragile and may act as choking hazards.   

3. 

Please store and assemble this model well out of the reach of small children. 

4. 

Only use batteries of the same or equivalent type. 

5. 

The power supply terminals are not to be short-circuited. 

6. 

Do not use new and old batteries together. Do not mix different brands or kinds of batteries. 

7. 

Make sure to insert batteries with correct (+) and (-) polarity. 

8. 

If the toy gets wet, dry it, and stop playing to avoid short-circuiting that may cause hazards. 

9. 

Do not put fingers, hair, or clothes into the shafts or rotating parts of the model. 

10. 

NEVER LEAVE CHARGING BATTERIES UNATTENTED!!!!!! 

 
PRODUCT CONTAINS SMALL PARTS - KEEP AWAY FROM YOUNG CHILDREN 
NOT SUITABLE FOR CHILDREN UNDER 14 YEARS OF AGE UNLESS SUPERVISED BY AN ADULT 
COLORS, SPECIFICATONS AND CHARACTERISTICS MAY BE DIFFERENT FROM PICTURE AND DESCRIPTON ON THE BOX 
AND MANUAL. 
Tates Performance Hobbies may be contacted by E Mail on – [email protected] or Phone 03 52224201 

 

CONTENTS – RX Ready Version. 

 

( The ARF version includes Motor, but does NOT have the servos installed, ESC 
controller, Battery or Charger ) 

KIT CONTENTS 

 
 
 
 
 
 
 
 
 

Summary of Contents for TL 2000













Reviews: