4
Cleaning
Clean the set by wiping the screen and the cabinet with
a soft, clean cloth or some special liquid cleaner.
Do not apply excessive force to the screen when
cleaning.
Do not use water or other chemical cleaner to clean the
screen as this may damage the surface of the TV
screen.
Do not place the set on an unstable cart, stand, or table.
Place the set on a place that allows good ventilation.
Do not use the set near damp, and cold areas. Protect
the set from overheating.
Keep the set away from direct sunlight.
Apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
Do not use the set near dust place.
Use Environment
Hanging the TV Set on the Wall
Warning: This operation requires two people.
To ensure a safe installation, observe the following safety
notes:
Check that the wall can support the weight of the TV
set and wall mount assembly.
Follow the mounting instructions provided with the wall
mount.
The TV set must be installed on a vertical wall.
Make sure to use only screws suitable for the material
of the wall.
Make sure that the TV set cables are placed so that
there is no danger of tripping over them.
All other safety instructions about our TV sets are also
applicable here.
Note
：
Graphics contained within this operating
instructions are for presentation only.
WARNING:
The batteries shall not be exposed to excessive heat
such as sunshine, fire or the like.
To fix the double support base on the unit by screws,
the installation is completed.
Base Installation
Introduction
1 Connect the pedestal to the TV set
Put the two pedestals on the designated positions
of the TV set carefully.
Lay your TV flat (screen down) on the edge of a
table or bench. Make sure that you put down a
soft cushion or cloth so that your TV is not
scratched.
2 Fasten and tighten the screws
Carefully put in screws and fasten them securely.
