Sanyo VPC-S5 Instruction Manual Download Page 120

Page: 120 / 142

117

English

COMMONLY ASKED QUESTIONS

Question

Answer

Action

LCD

monitor

When used in cold
weather, why
does the image
seem to leave
traces as it
moves?

Condition due to
the liquid crystals.

Not a malfunction.
Spots that appear
in the LCD
monitor only
appear in the
monitor and will
not be recorded
with the images.

Why does the
displayed image
contain some red,
blue and green
dots, or black
spots are visible?

Viewing

images

Why is the image
too bright?

The subject was
too bright.

When capturing
an image, devise
a way to
compensate for a
bright subject, for
example, by
changing the
shooting angle.

Why is the image
out of focus?

The focus is not
locked properly.

Hold the digital
camera correctly
and slowly press
the shutter
release button
halfway to lock the
focus. Then press
the shutter
release button all
the way to capture
the image.

Summary of Contents for VPC-S5















































































































































Search results

Summary of Contents for VPC-S5

Reviews:

Related manuals for VPC-S5

Brands by name

Popular brands

Sanyo VPC-S5, Instruction Manual

Search results

Summary of Contents for VPC-S5

Reviews:

Related manuals for VPC-S5

Brands by name

Popular brands