manualshive.com logo in svg

Sanyo VPC CG65 - Xacti Camcorder - 6.0 MP, Instruction Manual

Share
Download
Sanyo VPC CG65 - Xacti Camcorder - 6.0 MP Instruction Manual Download Page 125

111

English

EDITING VIDEO CLIPS

4 

Move the orange frame to the video 
clip you wish to join, and press the 
SET button.

h

The specified video clip is labeled 
with a number.

h

Up to 9 video clips can be selected.

h

To cancel a selection and remove 
the number label from a video clip, 
select the video clip and press the 
SET button.

5 

Press the [

] button.

h

A screen appears for you to select 
either to save the joined video clip 
as a new (separate) file, or to delete 
the original video clips and replace 
them with the joined video clip.

SAVE AS NEW:

The joined video clip will be saved as 
a new file. The original video clips 
remain unchanged.

OVERWRITE FILE:

The original video clips will be deleted. 
Only the joined video clip will be 
saved.

REVIEW CLIP:

Play back the joined video clip before 
saving it.

00:00:36

Select a clip

Press shutter to save

Approximate playback time

Number

SAVE AS NEW

OVERWRITE FILE

REVIEW CLIP

JOIN

OK

Summary of Contents for VPC CG65 - Xacti Camcorder - 6.0 MP















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands