Sanyo VPC-CG20 - Full HD 1080 Video Page 79 Instruction Manual Download

Page: 79 / 201

English

IM
P

LE
/P
LA
Y

Video clip playback operation

To do this...

Do this

Normal forward playback

Press the SET button.

Stop playback

During playback, toggle the SET button down.

Pause

During playback, press the SET button or
toggle the SET button up.
During accelerated playback, toggle the SET
button up.

To play back

one image

at a time

(single-

frame step)

During forward

playback

After pausing playback, toggle the SET button
to the right.

During reverse

playback

After pausing playback, toggle the SET button
to the left.

Slow

playback

During forward

playback

After pausing playback, press and hold the
SET button to the right.

During reverse

playback

After pausing playback, press and hold the
SET button to the left.

accelerate

playback

Forward

playback

During forward playback, toggle the SET
button to the right.

The playback speed changes each time the
SET button is toggled to the right, as follows:

Normal playback

→

Toggle the SET button to the left to resume
normal playback speed.

Reverse

playback

During forward playback, toggle the SET
button to the left.

The playback speed changes each time the
SET button is toggled to the left, as follows:

←

Toggle the SET button to the right to resume
normal playback speed.

Return to normal playback

speed

Press the SET button.

Adjusting the volume

Louder:

During playback, push the zoom
switch toward the [T] side.

Softer:

During playback, push the zoom
switch toward the [W] side.

Summary of Contents for VPC-CG20 - Full HD 1080 Video










































































































































































































Search results

Summary of Contents for VPC-CG20 - Full HD 1080 Video

Reviews:

Related manuals for VPC-CG20 - Full HD 1080 Video

Brands by name

Popular brands

Sanyo VPC-CG20 - Full HD 1080 Video, Instruction Manual

Search results

Summary of Contents for VPC-CG20 - Full HD 1080 Video

Reviews:

Related manuals for VPC-CG20 - Full HD 1080 Video

Brands by name

Popular brands