Sanyo VPC-CG10EXBK, Service Manual, Page: 13 / 58

-
13
-
1. LCD is opened.
2. Screw 1.7 x 2
3. Cover battery is opened.
4. Screw 1.7 x 3.5
5. Screw 1.7 x 5
6. Screw 1.7 x 5
7. Cabinet top
8. Two screws 1.7 x 3.5
9. Screw 1.7 x 3.5
10. Screw 1.7 x 5
11. Screw 1.7 x 5
12. Cabinet left
13. Holder lens
14. Heat sink tape left
15. Cover battery
16. Cover bat inner
17. Spacer cover batt
18. Heat sink rub heat L
19. Screw 1.7 x 2
20. Two screws 1.7 x 5
21. Screw 1.7 x 5
22. Screw 1.7 x 3.5
23. Cabinet middle
24. Screw 1.7 x 3.5
25. Stand
26. Spacer ST1 B
27. ST1 board
28. Connector
29. Screw 1.7 x 5
30. Earth VIS
31. Cabinet front
32. Two screws 1.7 x 3.5
33. Remove the solder.
34. Remove the solder.
35. Assy, lamp
36. Trans, step up
37. Screw 1.4 x 2
38. Dec front
39. Heat sink left
40. Spacer CA1 CN
41. FPC
42. Spacer CP1 lens
43. FPC
44. Lens
45. Spacer lens
46. Spacer FPC lens