Sanyo VCC-XZ600P Instruction Manual Download Page 66

Page: 66 / 100

Use the

button to select [OPTION] in the main menu, and press the SET button.

The OPTION screen appears.

Use the

button to select [DISPLAY], use the

button to choose “ON”, and press the

SET button.

The DISPLAY screen appears.
Set this option to “OFF” if you do not want the camera title and the zoom magnification power to be displayed on
the monitor.

Use the

button to select [TITLE], use the

button to choose “ON”, and press the SET

button.

The camera title setting screen appears.

Use the

buttons to select a character for the title from the character selection panel,

and press the SET button.

The selected character (“C” in the example below) appears in the first digit of the title entry field, and the cursor

66 / 100

Summary of Contents for VCC-XZ600P





































































































Search results

Summary of Contents for VCC-XZ600P

Reviews:

Related manuals for VCC-XZ600P

Brands by name

Popular brands

Sanyo VCC-XZ600P, Instruction Manual

Search results

Summary of Contents for VCC-XZ600P

Reviews:

Related manuals for VCC-XZ600P

Brands by name

Popular brands