Attaching the plastic tie (accessory)
If you do not want the drop-prevention chain to hang down, move the camera to the required position
and then secure the chain with the plastic tie (accessory) as shown in the illustration below.
Drop-prevention chain
Plastic tie (accessory)
Press the tab on the
plastic tie as shown
at right to release it.
Installing the sunshade (accessory)
If direct sunlight may shine onto the camera at times (depending on the angle of the sun), install the
sunshade.
1
Use the two accessory screws to install
the sunshade mounting bracket
(accessory).
Determine the position of the sunshade so
that it will protect from direct sunlight as
much as possible, and adjust the position of
the sunshade mounting bracket back and
forth while the screws are still loose
(adjustment range: 30 mm). After adjusting
the bracket position, securely tighten the
screws. (Tightening torque: 0.5 N.m or more)
2
Use the two accessory screws
(self-tapping type) to install the sunshade
(accessory). (Tightening torque: 0.5 N.m
or more)
Self-tapping
screw for
plastic
En
gl
is
h
6
Summary of Contents for VCC-XZ400P
Page 46: ......
