Sanyo VCC-PN9575P Specifications Download Page 6

Page: 6 / 8

B
m

Pro
inf

Inte

Swit
mon
also
from

Inst
Sim

Base
the r
enha
and
abilit
and

Fun

VDC

Use

VDC

Built-in Electronic Shutter

A high-speed electronic shutter that is internally switchable for
eight modes using a DIP switch allows adjustment increments
from 1/50 to 1/10,000 sec.

Operation on PoE, AC or DC Power Sources

The VDC-DPN9585P and VCC-PN9575P can operate on PoE,
12 V DC (12–15V DC) or 24 V AC (50 Hz, and even at a toler-
ance of

10%). Switching to the correct mode occurs auto-

matically when power is supplied.

Multi-spot metering measures luminous intensity in 64 areas on screen to enable
optimal backlight compensation even for peripheral and moving objects.

520 TV Line Resolution

(Analog Video Signal)

Featuring SANYO’s DSP circuitry and a high performance 1/4-
inch CCD for horizontal resolution of more than 520 TV lines
and superior color reproduction. Sharp, crisp images are
delivered for greater precision in surveillance under a varied
range of conditions.

Intelligent Backlight Compensation

The VDC-DPN9585P and VCC-PN9575P feature two selectable
backlight compensation modes: multi-spot metering (applied to
the whole screen) and center-zone metering (applied to the
central portion only).

Privacy Masking (Up to 8
Masks)

When there is a house or even
an object as small as a window
within the camera frame, it is
possible to mask the area so that
it will not appear on the monitor
screen to protect other’s privacy.
Up to 8 rectangular masks of arbitrary size can be set. These
masking areas may be protected with a 4-digit (max.) password.

Flexible Motion Detection

Sensing is performed by splitting the field of view into 16
areas. Movement and brightness levels within the picture are
analyzed to accurately detect surveillance targets. Upon detec-
tion, the camera sends an alarm status signal and captures the
object at zoom magnifications of up to x2.6. Fine adjustments
of settings such as sensitivity, tracking time, zoom ratio and
areas not requiring detection can also be made.

Areas with swaying trees or flickering light, etc. can be eliminated to avoid false
alarms. Surveillance of the detected object can be conducted at a zoom magnification
of x1.0, x1.4, x2.0 or x2.6.

x2.6

VDC-DPN9585P

VAC-70

Monitor

Video coaxial cable

PTZ Operations

Both the VDC-DPN9585P and VCC-PN9575P come with a PT
mechanism and allow panning of 335 degrees (110 degrees*)
and tilting of 90 degrees (90 degrees*) to reduce blind spots in
the surveillance area. When particular angles are preset on the
camera (up to sixteen points), it moves to each position quick-
ly at the speed of 120 deg/sec. max. for both panning and tilt-
ing. Combining these features with the motion detector, it is
possible to catch all actions taking place in the area.

*For wall-mounted cameras

Ceilling mounting

Wall mounting

Photos of VDC-DPN9585P

Panning
Tilting

0 to 335

0 to 90

–55 to 55

0 to –90

Panning
Tilting

16 Preset Positioning and
Sequential Monitoring
Functions

Up to 16 preset positions (with
different settings for pan, tilt and
zoom) can be registered for a
single VDC-DPN9585P or VCC-
PN9575P. A simple key entry to
a controller allows you to easily switch to the scene you want to
monitor. Auto-pan monitoring can be also be programmed by
designating two end points on a horizontal plane.

Control switch
inside camera

Adjustment via VAC-70 Control Unit

(Sold Separately)

Connection of the VAC-70 control unit allows adjustment of
pan/tilt, angle of view, motion detector, backlight compensa-
tion and other functions from in front of a monitor. The lens

angle can be adjusted directly via a control
switch inside the camera housing.

Functions Specific to the

VDC-DPN9585P/VCC-PN9575P

Atta

VA-

Mou

Mod

VDC

VCC

Mou

In the

The p
Pleas