To use this function, on the PRESET POSITION SETTINGS screen, register preset positions which
you want to monitor in sequence in the same groupe.
1
In [SEQUENCE], select “1”.
2
Configure the monitoring sequence
STEP: Moves in the numerical order of preset positions.
RANDOM: Moves in a random manner among the preset positions in the group.
3
Set a uniform pause period at each preset position
3SEC, 4SEC, 5SEC, 6SEC, 7SEC, 8SEC, 9SEC, 10SEC, 15SEC, 20SEC, 30SEC, 45SEC, 1MIN
PRESET (Applies the pause period that is set for each preset position.)
4
Select a movement speed and click
SET
.
1 (slow) to 15 (quick)
Now the settings for the sequence 1 have been stored.
You can follow the same steps to configure for the sequences 2 to 4.
Running the Stored Sequence Operation
In [SEQUENCE], select a registration number and click
RUN
to run the specified operation.
Four patterns of auto panning operation are available as shown below.
Working with Administrator Configuration Screens 46/79
