Video output
HD Output: HDMI terminal (TYPE C)
Monitor output: BNC terminal (MONITOR OUT)
LAN
10BASE-T/100BASE-TX (RJ-45 connector)
EX-HDD Connector
For connecting an external hard disk drive case
SD Card Slot
1 (SDHC compliant, max. 32 GB supported)
Alarm input
4 (NO/NC), also used for switching between day and night modes
Alarm output
2 (NO/NC, 16V, 150 mA, open collector)
Audio input/output
Audio input (white: 3.5-mm mini jack)
Audio output (black: 3.5-mm mini jack)
Communication method
RS-485
Protocol
SSP, PELCO-D
Baud Rate
2400, 4800, 9600, 19200
Address
1 - 255 (sanyo SSP: 1 to 127)
SD memory card
Normal recording, alarm recording, backup video recording in event of a network
failure, log information
External HDD
Normal recording, alarm recording, backup video recording in event of a network
failure, log information
Image/video
compression
H.264/JPEG
Video size (H.264)
(16:9) 1920×1080, 1280×720, 640×360, 320×180
(4:3) 1600×1200, 1280×960, 1024×768, 640×480, 320×240
Video size (JPEG)
(16:9)1920×1080, 1280×720, 1024×576, 640×360
(4:3) 1600×1200, 1280×960, 1024×768, 800×600, 640×480, 320×240
Picture quality
QUALITY mode: BASIC, NORMAL, ENHANCED, FINE, SUPER FINE
BITRATE mode: User-specified bit rate
Interface
10BASE-T/100BASE-TX
Protocol
TCP/IP, UDP, HTTP, HTTPS, SMTP, NTP, DHCP, FTP, DDNS, RTP, RTSP, RTCP
Audio
G.711 (Bidirectional)
Simultaneous access
20
Security
BASIC authentication (ID/password), SSL, IP filtering
Introduction 4/15
