Sanyo VCC-9250P, Instruction Manual

Page: 14 / 16

SPECIFICATIONS
Camera functions
Signal format : PAL standard (625 TV line, 25 frame/sec.)
Image device : 1/3 inch solid state image device CCD
Picture elements : 795 (H) x 596 (V)
Effective picture elements : 752 (H) x 582 (V)
Synchronizing system : Internal sync, Line lock sync switchable
Resolution : 450 TV lines horizontally, 400 TV lines vertically
Video out put level : VBS 1.0 Vp-p, 75
Ω
composite
Video S/N ratio : More than 48 dB
Minimum required illumination
(incandescent lighting) : Approx. 3.5 lux
Backlight correction : Center-zone light measuring system
White balance : ATW/AWC
Electronic shutter : 4 speed, selectable setting (1/50, 1/120, 1/500, 1/2000)
Electronic zoom : X8
Rotation angle : Horizontally 360˚ endless, vert5 to –90˚
Rotation speed : Horizontal
Manual: approx. 0.6˚/s (telephoto) to approx. 40˚ (wide angle)
Preset: 240˚/s
Auto pan: approx. 9˚/s
Vertical
Manual:
approx. 0.3˚/s (telephoto) to approx. 20˚/s (wide angle)
Preset: 120˚/s
Preset position : 1 ~ 255
Lens functions
•
Focal length : f = 5.4 to 64.8 mm (X12 zoom)
•
Aperture ratio : F = 1:1.8 (wide angle) to 1:2.7 (telephoto)
•
Iris range : F1.8 ~ F28
•
Picture angle : Horizontally 48.8˚ (wide angle) to 4.3˚ (telephoto)
Vertically 37.6˚ (wide angle) to 3.3˚ (telephoto)
•
Minimum distance : 10 mm (wide angle) to 800 mm (telephoto)
Communication method : RS-485, operation via SSP
Communication speed (band rate) : 2400, 4800, 9600, 19200 bps
Address setting : 1 ~ 127
Transmission method : Binary transmission
Power source : 24V AC (20 to 26V), 50 Hz
Environmental conditions : Temperature: 0 to 45 ˚C
Humidity: 35 to 90 %
Weight : 1.6 kg
Power unit
AC 24 V input terminal : 2
AC 24 V output terminal : 1
RS-485 Baud rate switch : Communication speed (2400, 4800, 9600, 19200 bps)
Alarm duration time (5 sec./ 30 sec.),
Alarm list setting
RS-485 Address/Terminate switch : Address setting (SW1 ~ 7), terminate setting (SW8)
Alarm input terminal : No voltage, make-contact switch input x 8 (Low input)
RS-485 control terminal (DATA) : Push-lock type 5 terminals (A, B, A, B: Ground)
Fuse : 125 V 3 A
Power consumption : 42 W
Weight : Approx. 3.0 kg
L53Y4/XE (VCC-9250P GB) 2000. 11. 28
13