Power supply terminals
24 V AC and 12 V DC dual power capability
eliminates limitations on camera location.
Y/C signal output terminal
Type of coaxial cable and maximum length
• Mini-DIN round type 4-pin, 10 m maximum
VCC-6975P rear panel
V phase adjustment
Scanning system
Image sensor
Picture elements
Horizontal resolution
Minimum illumination
Motion detector
Backlight compensation
White balance
Electronic shutter
Light control
Lens mount
Flange back
Auto iris lens
Auto iris output
Lens iris level
Synchronizing system
Auto iris lens
Power requirement
Power consumption (approx.)
Camera mount
Dimensions (approx.)
Weight (approx.)
Gain control
Power supply
External sync.
Video signal
Sockets
PAL standard 625 lines, 25 frames/sec.
1/3" (approx. 4.8 mm x 3.6 mm) interline transfer method CCD
Total: 795(H) x 596(V), Effective: 752(H) x 582(V)
480 TV lines
Approx. 1.4 Lux (F1.2, normal mode)
Approx. 0.05 Lux (F1.2, x32 electronic sensitivity)
ON / OFF ––– (on screen)
ON = x2 / x4 / x8 / x16 / x32 ––– (on screen)
Electronic sensitivity
ON / OFF ––– (on screen)
Alarm out: RS485 (G, B, A) and ALARM (C, A)
Multi-zone light measuring system
ON / OFF ––– (on screen)
Short mode: 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec. ––– (on screen)
Long mode: 2/50, 4/50, 8/50, 16/50, 32/50 sec. ––– (on screen)
Optical auto iris lens / Electronic iris (indoor use)
CS / C mount (C mount: using C-mount adaptor supplied)
12.5 mm
±
0.5 mm adjustment
DC / VIDEO ––– Slide SW (side)
LEVEL: L~H ––– (on screen)
1.4 Lux to 70,000 Lux (F1.2), 2.0 Lux to 100,000 Lux (F1.4)
ON / OFF ––– (on screen)
External sync.
automatic switching
Internal sync. / Line lock ––– (on screen)
LENS ––– 4-pin (side)
Temperature: -10
°
C to 50
°
C [14
°
F to 122
°
F], Humidity: within 90% RH
24 V AC, 50 Hz or 12 V DC
24 V AC: 4.0 W (with auto iris lens), 12 V DC: 4.1 W (with auto iris lens)
1/4"–20 UNC (top / bottom selectable)
ON (Automatic) / OFF ––– (on screen)
24 V AC, GND ––– 3-pin terminal (rear)
12 V DC ––– 2-pin terminal (rear)
VIDEO OUT ––– BNC (rear)
Y/C signal out
mini-DIN 4-pin (rear)
SSP (RS-485)
RS485 (G, B, A) ––– Pushbutton terminal x 1 pair (rear)
Alarm signal
ALARM (C, A) ––– Pushbutton terminal x 1 pair (rear)
Electronic iris
Electronic iris range
Environmental conditions
VCC-6975P
MODEL
LINE PHASE ––– (on screen)
(TTL) ATW / AWC / Manual ––– (on screen)
DC: Drive coil (+, -), Brake (Damp) coil (+, -)
VIDEO: +12 V DC (Max. 50 mA), Video output (high-impedance)
VBS IN ––– BNC (rear)
67(W) x 54(H) x 126.5(D) mm
[2.64(W) x 2.13(H) x 4.98(D) in.] (w/o camera & lens mounts)
470 g [16.6 oz.] (w/o lens)
ON = Multi-spot photometry / 5-section photometry ––– (on screen)
Video output level
1.0 V (p-p) (75 ohms, composite)
Video S/N ratio
More than 48 dB
Electronic zoom
ON / OFF ––– (on screen)
ON = Continuance (up to x8), Fix (x2 / x4 / x8), Pan / tilt operation
Gamma
ON (
γ
= 0.45) / OFF ––– (on screen)
Camera ID
ON (up to 8 characters) / OFF ––– (on screen)
Mirror image effect
H, V, H/V, 3 mode reverse image
Synchronization
signal input terminal
SSP terminal
LENS
SET
CURSOR
15.4
LENS 4-pin
67
54
28
25.2
11
1/4"–20 UNC threaded hole
(top / bottom selectable)
1
126.5
9.5
136
ADJ.
LOCK
DIGITAL
COLOR CCD CAMERA
FLANGE BACK
VCC-6975P
(Unit: mm)
TLS-9960P
TLS-9168P
TLS-9024P
960-hour Recording Time Lapse VCR
VSP-7000
SSP System Controller
168-hour Recording Time Lapse VCR
MPX-CD162P
MPX-MD162P
16-channel Duplex Multiplexer (Colour)
16-channel Duplex Multiplexer (B/W)
MPX-CD92P
9-channel Duplex Multiplexer (Colour)
MPX-MS92P
9-channel Simplex Multiplexer (B/W)
24-hour Recording Time Lapse VCR
SSP corresponding devices
As of March 2000
Multiplexer
System Controller
Time Lapse VCR
SRT-7168P
168-hour Rec Realtime VCR
SRT-6000P
40-hour Rec Realtime VCR
Realtime VCR
*More models will be introduced soon.
VCL-CS8LY
Standard Lens
VA-TS6ZE-LY
x 6 Manual Zoom Lens
VCL-CS4LY
Wide-angle Lens
VCL-CS2LYA
Super Wide-angle Lens
VA-TS420PE-LY
Pinhole Lens
VA-TS2VE-LY
Vari-focal Lens
VA-TS10ZME-LY
x 10 Motorized Zoom Lens
VA-TS6ZME-LY
x 6 Motorized Zoom Lens
Lenses for 1/3" CCD camera
VAC-60
(sold separately)
Camera Set-up Unit
AC adaptor
(for VCC-6975P)
VCA-35E
(sold separately)
Video output terminal
Camera input terminal
Environmental conditions
Power requirement
BNC x 1
BNC x 1
Temperature: 0
°
C to 40
°
C [32
°
F to 104
°
F], Humidity: 10 to 90%
3 V DC, Alkali type AAA format batteries x 2
Dimensions
90(W) x 135(H) x 36(D) mm [3.54(W) x 5.32(H) x 1.42(D) in.]
Weight (approx.)
230 g [8.1 oz.]
VAC-60
MODEL
Power requirement
Power consumption (approx.)
Dimensions (approx.)
Weight (approx.)
220 ~ 230 V AC, 50 Hz
17 VA max.
68(W) x 62(H) x 100(D) mm [2.68(W) x 2.44(H) x 3.94(D) in.]
680 g [24 oz.]
VCA-35E
MODEL
Monitor
Video output terminal
Type of coaxial cable and maximum length
• Cable type RG-59U (3C-2V), 250 m maximum
• Cable type RG-6U (5C-2V), 500 m maximum
• Cable type RG-11U (7C-2V), 600 m maximum
LENS
SET
CURSOR
VCC-6975P
VAC-60
VAC-60 rear panel
SANYO Electric Co., Ltd.
Distributed by:
Video Imaging Systems Division
© 2000 SANYO Printed in Japan
'00.3. AP
Remote set-up makes you feel you have the camera right
beside your monitor. Capable of setting up VCC-6975P
for all on-screen menu items (intelligent digital motion
detector, backlight compensation, white-balance, etc.)
For better picture quality, disconnect this unit after
settings are completed.
*Specifications subject to change without notice
*Specifications subject to change without notice
please consult the instruction manual to ensure safe and proper operation of th
please consult the instruction manual to ensure safe and proper operation of the product.
e product.
*Caution:
*Caution:
*Specifications subject to change without notice
please consult the instruction manual to ensure safe and proper operation of the product.
*Caution:
1/3" Colour CCD
High-resolution Camera
Intelligent digital motion detector
SSP compatible
x32 Electronic sensitivity
(minimum illumination of 0.05 Lux)
x8 Digital zoom with digital pan and tilt
Built in DSP (digital signal processing) circuit
480 TV lines of horizontal resolution
Dual power operation, 24 V AC / 12 V DC
