IMAGE TRANSFER SETTINGS
(“admin” only)
English
17
■
For FTP connection
1
IMAGE TRANSMISSION
Set the image transfer mode to “
FTP
”.
2
Configuring the FTP information
The following FTP information is specified in these
setting items.
• PORT NUMBER
Please set the same number as the control port
number configured on the server side. Normally
“21” is set.
Note:
3000 - 5000, 10000, 10001 and 38214 cannot
be set.
• SERVER ADDRESS
• USER ID
• PASSWORD
• FTP PASSIVE
3
ALARM
1
Configures the operating conditions and camera
ID for alarm recording.
• ALARM
Configures alarm recording as ON/OFF.
• CAMERA ID
This is inserted to the file name of the alarm
recording image. It is also used as the name
of the folder created on the server side.
Note:
If the CAMERA ID is not configured, “sanyo”
and “alarm” are substituted as the file name
and folder name respectively.
• OVERWRITE
Configures whether or not to overwrite file
data transmitted to the FTP server.
Note:
Voice cannot be included in the alarm recording
if the image transfer mode is “FTP”.
1
2
3
5
4
1
2
3
OFF
Stores all files without conducting
overwrite (date and time information
is displayed in the file name).
ON
Overwrites (date and time
information is not displayed in the
file name).
