RECORDING USING AN EXTERNAL TIMER
INPUT
Recording can be controlled by an external start/stop
signal input at the EXT TIMER IN terminal.
Example 2:
To record using the signal input at the
EXT TIMER IN terminal, in 24-hour
mode.
œ
Follow the Before starting steps, under “NORMAL
RECORDING”.
NOTE:
œ
External timer input recording can only be set on the
9th line (EXT) of the (TIMER SET) menu.
1
Press the MENU button until the (TIMER SET)
menu is displayed.
2
Turn the JOG dial, until “EXT” (External) setting is
flashing.
ø
The “SPD” (recording speed) position will start
flashing.
3
Turn the SHUTTLE ring to select the recording
speed mode (ex: 24), then turn the JOG dial
clockwise.
ø
“N” will start flashing.
4
Turn the SHUTTLE ring to select “Y”.
@@@@@@<TIMER@SET>
WEEK@START@@STOP@@@SPD
SUN@@--:--@@--:--@@---@N
MON@@--:--@@--:--@@---@N
TUE@@--:--@@--:--@@---@N
WED@@--:--@@--:--@@---@N
THU@@--:--@@--:--@@---@N
FRI@@--:--@@--:--@@---@N
SAT@@--:--@@--:--@@---@N
DLY@@--:--@@--:--@@---@N
EXT@@ööööö@@ööööö@@@24@Y
5
Follow steps
F
and
G
under “PROGRAMME
TIMER RECORDING on page 21”.
ø
When an external signal is input, “E” will light
on the digital display and recording will take
place.
NOTES:
œ
Other timer recordings using the standard procedure
can also be programmed.
œ
The external input signal must be input at the EXT
TIMER IN terminal.
RR4Q/EX2 (TLS-9024P GB) Fri. Sept., 29/2000
24
English
