NORMAL RECORDING
Normal Recording
œ
Turn the power on to all devices used.
œ
Load a cassette tape with erasure-prevention tab.
œ
Set the ON SCREEN switch to the “ON” position.
1
Press the REC/PLAY SPEED
l
(or
j
) button to set
the recording speed mode.
ø
The recording speed mode is displayed
on-screen and on the digital display.
2
Press the REC button.
ø
The record indicator “
m
”
light.
ø
Recording starts.
ø
When the end of the tape is reached, “OFF”
will be displayed.
NOTES:
œ
If in the (SET UP 2) menu, in the BUZZER
section TAPE END is set to “Y”, the buzzer will
be heard as long as “OFF” is displayed on the
digital display.
œ
To cancel the “OFF” display, press the STOP,
EJECT or PLAY button or turn the SHUTTLE
ring.
œ
If recording stops due to a problem with the tape
or other reason, the unit will try once to resume
recording. If the tape still does not advance, the
VCR will go into stop mode.
3
To stop recording, press the STOP button.
NOTES:
œ
A tape recording made on this VCR may not play
back with the same degree of clarity on a time lapse
from another manufacturer.
œ
If you press on the REC button and the loaded
cassette has no erasure-prevention tab, the VCR will
eject the cassette.
[Recording Speed Mode]
Recording
speed mode
(hour mode)
Maximum
recording
duration
(hours)
Recording
interval
(second)
Audio
recording
Tape motion
3
3
1/50
Possible
Continuous
12
15
5/50
24
27
9/50
Record Pause
Recording can be interrupted temporarily.
1
Press the STILL/PAUSE button during recording.
ø
The Pause/Still indicator “
N
”
blinks.
NOTES:
œ
The image appears on-screen but it is not
recorded.
œ
If a recording pause continues for 5 minutes or
more, the VCR will go into stop mode to avoid
damaging the tape.
2
To resume recording, press the REC button, or
press the STILL/PAUSE button again.
Before starting
RR4Q/EX2 (TLS-9024P GB) Fri. Sept., 29/2000
14
English
