Install on a stable level surface
IMPORTANT SAFEGUARDS
INSTALLATION
!
WARNINGS
!
Be sure to connect POWER PLUG and
POWER CORD properly.
Be sure to plug the POWER CORD
into a proper outlet for the washer.
An improperly attached plug may
catch fire.
Never disconnect by pulling the
cord. Hold the plug as you pull it out.
Never use a damaged POWER CORD.
Never connect and/or disconnect the
POWER PLUG with wet hands, it may
cause an electric shock.
CAUTIONS
Do not allow the wash load to stick
out from the WASH or SPIN TUB.
Do not wash, rinse or spin
waterproof clothes or sheets.
Push evenly thick clothes or bulky
wash items completely down into the
WASH or SPIN TUB. Otherwise, it
may deform or damage the washer.
Do not use water hotter than
50
℃
.
It may deform plastic parts
in the washer and cause a
malfunction.
Do not put your hand(s) under
the washer during operation.
It may deform or damage the
washer, and it may cause
you injury.
Do not get on the washer or
put any heavy things on the
washer.
Rotating parts may cause
injury.
!
Connect the DRAIN HOSE
Extension of DRAIN HOSE.
Shorter than 1m
Lower than 15cm
Not higher than 1m
Never let the end of the DRAIN HOSE be
immersed in the water.
Be sure not to bring any type of
flame near the washer or put lit
cigarettes or volatile materials on
the top of the washer.
Never wash items stained with
benzine, kerosene, thinner or
gasoline.
It may deform the washer or
catch fire, because this washer
has a large number of plastic
parts.
Do not install the washer in the bath-
room or very humid place.
It may cause a malfunction
or an electric shock.
This appliance is not intended for use by
persons(including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for their safety.
It may cause a risk of fire or
explosion.
Be sure not to splash or pour
water on the CONTROL PANEL.
It may cause a malfunction or
an electric shock.
Do not allow your washer to be
repaired by an unqualified service
person.
It may cause a risk of accidental
fire.
If the washer operates abnormally,
it may cause injury.
If the power cord is damaged, in
order to avoid danger, please ask
a technical person to repair it.
Be sure to remove things such as
keys, pins and coins from the lau-
ndry.
Plug the POWER CORD
into the outlet.
Let down the DRAIN
HOSE.
Connect the INLET HOSE
Wash oily or dyed laundry
separately.
Wash delicate clothes in a
nylon net.
Wash fuzzy laundry by turning it
inside out.
PREPARATION BEFORE WASH
Install the washing machine on a stable,
level surface.(oblique angle should be
within 2
°
This washing machine has ventilation openings in the base. Do not obstruct the holes with a carpet or towel.
Keep the washing machine more than 5cm
apart from the wall to prevent a noisy sound
while spinning.
)
5
2
Never put your hand(s) into the
WASH or SPIN TUB, while the
washer is operating.
If you reach into the WASH or
SPIN TUB, it can cause injury.
<Without pump model>
<With pump model>
The
new
hose-sets supplied with
the appliance are to be used and
that old hose-sets should not be
reused.
