Sanyo SRC-850, Instruction Manual

Page: 20 / 35

SERIES RECORDING
Continous Loop Recording Setup
It is possible to configure at least two this VCR for
continous loop recording.
Under loop recording when the recording finishes on the
first unit, the new recording will start on the second unit.
When the recording finishes on the second unit, recording
will start on the first unit.
1
The SERIES OUT terminal of VCR No.2 and the
SERIES IN terminal No.1 should be connected (See
diagram).
2
Set the following items as indicated.
Item VCR No.1 VCR No.2
Cassette tape Loaded Loaded
Operation mode Stop Stop
“TAPE END MODE” (in
(SET UP 2) menu)
REW REW
“OUTPUT” (in (SET UP
2) menu)
SERIES SERIES
“SERIES REC IN” (in
(SET UP 2) menu)
Y (YES) Y (YES)
Security lock Canceled Set
3
Press the REC button on VCR No.1.
°
Recording will start in series recording mode.
4
Set the security lock on VCR No.1.
NOTES:
•
The “TAPE END MODE” in (SET UP 2) menu should
be set to “REW” for both units without fail.
•
If TAPE END MODE is set to “REW”, when the end of
the tape is reached “OFF” is displayed, the tape is
rewound then stop. TAPE END indicator will flash until
the recording starts.
•
In loop recording mode, the tape will be re-recorded
over. If you need to keep the recorded infomation,
please eject the tape after recording is complete and
insert a new tape.
Loop recording connection (example with 2 VCRs)
A B A B A B A B
ALARM
IN COM OUT
SERIES OUT/
NON REC OUT SERIES
IN OUT IN
EJECT SW
OUT
TAPE
END OUT COM
WARNING
OUT
RS485
COM
RS485
ALARM
IN COM OUT
SERIES OUT/
NON REC OUT SERIES
IN OUT IN
EJECT SW
OUT
TAPE
END OUT COM
WARNING
OUT
RS485
COM
RS485
VCR No.2
Video camera
To
VIDEO IN
jack
To
VIDEO OUT
jack
VCR No.1
To
VIDEO IN
jack
To
VIDEO OUT
jack
To
SERIES IN
terminal
To COM
terminal
To
SERIES OUT
terminal
To COM
terminal
To
SERIES IN
terminal
Monitor TV
To
SERIES OUT
terminal
NU4Q/U3 (SRC-850 GB) Mon. Aug., 23/1999
English
19