Sanyo SRC-800A Instruction Manual Download Page 28

Page: 28 / 42

PLAYBACK

Normal Playback

Turn on the power to the VCR and TV monitor.

Load the video cassette tape.

Press the PLAY button.

Playback starts.

If necessary, adjust the tracking to eliminate the
noise from the picture.

If the image is unstable (rolling vertically),
adjust the vertical lock control to correct.

To stop playback, press the STOP button.

To advance (or rewind) the tape, press the FF
(or REW) button.

NOTE:

A tape recorded on a video cassette recorder
produced by another manufacturer may not play back
with the same degree of clarity on this unit.

Tracking Control

If there is noise in the image during playback,

While looking at the playback picture, press the
T button repeatedly to minimize the
noise.

If it cannot be minimized, press the TRACKING–
button repeatedly.

NOTE:

This function does not operate when a warning
display appears on the digital display.

Vertical Lock Control

During still image mode,

Press the T button repeatedly to reduce
the vertical rolling of the image.

If it cannot be corrected, press the TRACKING–
button repeatedly.

NOTE:

This function does not operate when a warning
display appears on the digital display.

Picture Search (Forward and Reverse)

Press the FF (or REW) button, during normal
playback.

The image can be seen while the tape is
advanced (or rewound) at high speed.

To return to normal playback, press the PLAY button.

NOTES:

During picture search, noise (horizontal bars) will
appear in the picture.

The sound is muted.

Still Image

Press the STILL/PAUSE button, during normal
playback.

A still image can be viewed.

To return to normal playback, press the PLAY button.

NOTES:

If still mode continues for 5 minutes or more, the VCR
will go into stop mode to avoid damaging the tape.

If the image is unstable (rolling vertically), adjust the
vertical lock control to correct.

The sound is muted.

Field Advance (Forward and Reverse)

Press the FF (or REW) button, during still image
mode.

The still image is advanced (or rewound) of one
image (field).

To return to normal playback, press the PLAY button.

NOTES:

During reverse field advance, noise will appear in the
picture.

If field advance mode continues for 5 minutes or
more, the VCR will switch to stop mode to avoid
damaging the tape.

The sound is muted.

NF4Q/NA2 (SRC-800A GB) Tue. Sept., 10/2002

English

Summary of Contents for SRC-800A











































Search results

Summary of Contents for SRC-800A

Reviews:

Related manuals for SRC-800A

Brands by name

Popular brands

Sanyo SRC-800A, Instruction Manual

Search results

Summary of Contents for SRC-800A

Reviews:

Related manuals for SRC-800A

Brands by name

Popular brands