background image

SETTING THE LANGUAGE AND CLOCK

Language Setting

English or French can be selected by the user.

1

Turn the power on to all devices used.

2

Press the MENU button to display the (SET UP 1)
menu.

3

Press the 

]

 button, until “ENGLISH” is flashing.

4

Press the 

l

 (or 

j

) button to select the language of

your choice.

5

When finished, press the PAUSE/SEARCH button to
save the settings.

Clock Setting

Example:

To set the clock to October 15, 1999 at 3:20
PM (15:20).

1

Press the MENU button to display the (SET UP 1)
menu.

2

Press the 

l

 (or 

j

) button, to set the auto

daylight/standard time adjustment.

NO USE . . . . . . . . . .  No daylight/standard time

adjustment made.

USE . . . . . . . . . . . . .  The auto daylight/standard

time adjustment made.

3

Press the 

]

 button.

4

Set the day the daylight saving time adjustment is
made.

Press the 

l

 (or 

j

) button to set the week, then

press the 

«

 button.

1ST, 2ND, 3RD, 4TH or LST (first, second, third,
fourth or last)

Press the 

l

 (or 

j

) button to set the day of the

week, then press the 

«

 button.

SUN, MON, TUE, ...... SAT (Sunday, Monday,
Tuesday....Saturday)

5

Press the 

l

 (or 

j

) button to set the month the

daylight saving time adjustment is made, then press
the 

«

 button.

01, 02,.....11, 12 (for January,
February......November, December)

6

Press the 

l

 (or 

j

) button to set the time the daylight

saving time adjustment is made.

7

Press the 

]

 button.

8

Following the same procedure as above (steps 

4

 to

6

), set when the time is changed back from daylight

saving time to standard time.

9

Press the 

]

 button.

F

Press the 

l

 (or 

j

) button to set the month (ex: 10),

then press the 

«

 button.

°

The day of week is set automatically.

G

Press the 

l

 (or 

j

) button to set the day (ex: 15), then

press the 

«

 button.

H

Press the 

l

 (or 

j

) button to set the year (ex: 99 for

1999), then press the 

«

 button.

NOTE:

The last 2 digits only are displayed.

I

Press the 

l

 (or 

j

) button to set the hours (ex: 15 for

3 PM), then press the 

«

 button.

J

Press the 

l

 (or 

j

) button to set the minutes (ex: 20),

then press the 

«

 button.

K

For accurate clock setting, press the 

l

 button timed

with a time broadcast, or other accurate time signal,
this will start the seconds counting from 00.

L

When finished, press the PAUSE/SEARCH button to
save the settings.

        <SET UP 1>
 ¤DAYLIGHT SET   NO USE
         WEEK MONTH TIME
  ON   1ST-SUN  04 02:00
  OFF  LST-SUN  10 02:00

 ¤CLOCK SET
  01-01-00 SAT  00:00:00

 ¤LANGUAGE
  ENGLISH

        <SET UP 1>
 ¤DAYLIGHT SET    USE
         WEEK MONTH TIME
  ON   1ST-SUN  04 02:00
  OFF  LST-SUN  10 02:00

 ¤CLOCK SET
  10-15-99 FRI  15:20:00

 ¤LANGUAGE
  ENGLISH

NU4Q/U (SRC-800 GB) Fri. Aug., 06/1999

9

Summary of Contents for SRC-800

























Reviews: