PLAYBACK
Normal Playback
1
Turn on the power to the VCR and TV monitor.
2
Load the video cassette tape.
3
Press the PLAY button.
°
Playback starts.
°
If necessary, adjust the tracking to eliminate the
noise from the picture.
4
To stop playback, press the STOP button.
°
To advance or rewind the tape, press the
FF
or
REW
button.
NOTE:
•
A tape recorded on other VCRs can be playback on this
unit, however if a tape is recorded in SP mode with
another VCR then its playback will be done in 2-hour
(when using T-120 tape) mode.
Tracking Control
If there is noise in the image during playback,
1
While looking at the playback picture, press and hold
the TRACKING/V. STILL + button to minimize the
noise.
2
If it cannot be minimized, press the TRACKING/V.
STILL – button.
Picture Search
1
Press the FF (or REW) button, during normal
playback.
°
The image can be seen while the tape is
advanced (or rewound) at high speed.
2
To return to normal playback, press the PLAY button.
NOTES:
•
During picture search, noise (horizontal bars) will
appear in the picture.
•
The sound is muted.
Still Image
1
Press the PAUSE/SEARCH button, during normal
playback.
°
A still image can be viewed.
2
To return to normal playback, press the PLAY button.
NOTES:
•
If still mode continues for 5 minutes or more, the VCR
will go into stop mode to avoid damaging the tape.
•
If the image is unstable (rolling vertically), adjust the
vertical lock control to correct.
Vertical Lock Control
During still image mode,
1
Press and hold the TRACKING/V. STILL + button to
reduce the vertical rolling of the image.
2
If it cannot be corrected, press the TRACKING/V.
STILL – button.
Frame Advance
1
Press the FF button, during still image mode.
°
The still image is advanced of one image (field).
2
To return to normal playback, press the PLAY button.
NU4Q/U (SRC-800 GB) Fri. Aug., 06/1999
16
