Sanyo SI-10T3SCIC Series, Operating Instructions Manual

Page: 15 / 24

To set the timer
To turn ON and OFF the unit at a preset times.
Operation conditions
Use this air conditioner under the following
temperature range.
DBT : Dry bulb temperature
WBT : Wet bulb temperature
52 30
ON OFF CANCEL
1 2
• To cancel ON or OFF timer, press .
• If timer is cancelled manually or due to power
failure, you can restore the timer again by
pressing or then wait for “5” sec.
• The nearest timer setting will be displayed and
will activate in sequence.
• When ON Timer is set, the unit may start
earlier (up to “15” minutes) before the actual
set time in order to achieve the desired
temperature on time.
ON OFF
CANCEL
Select ON or OFF
timer
Set the time
Confirm
Example:
OFF at 14:00
Press the OFF
button.
OFF
OFF OFF OFF OFF OFF
•
Wait for “5” second to set timer. •
Press OFF button again to
increase timer time in step
of “10” minutes.
•
To select fan speed
(Remote control display)
(Low) (Medium) (High)
AUTO
FAN
QUIET
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
To adjust airflow direction
• Keeps the room ventilated.
• If AUTO air swing is set, the flaps swings up/down
automatically.
• Do not adjust the flap by hand.
(Remote control display)
To clean dust on evap. coil of
the Air-Conditioner Unit
CLEAN
• ‘CL’ will be displayed on unit and remote controller.
While ‘CL’ is diplayed, all other functions of the
remote controller will be disabled, except for
ON/OFF button. Applicable for 10 to 15 minutes.
• This feature can only be used in OFF condition.
hour