Sanyo SCP-4930, User Manual

Page: 48 / 277

40 Section 2A: Your Phone – The Basics
Using Speed Dialing
With this feature, you can dial your favorite entries using one
key press for locations 2-9. (See “Assigning Speed Dial
Numbers”on page 128.)
To use speed dial for voice calls:
From standby mode, press and hold the appropriate key
for approximately two seconds.
- or -
From standby mode, press the appropriate key and press
T
or
S
.
The display confirms that the number has been dialed when it
shows “Connecting...”.
To use speed dial for Ready Link calls:
From standby mode, press the appropriate key and
press
"
. (See “Assigning Speed Dialing for Ready Link
Entries”on page 200.)
The display confirms that the number has been dialed when it
shows “R-Link calling...”.
Note:
Speed dialing is not available when you are roaming off the network
available to you; when you are roaming, you have to dial using eleven digits
(1 + area code + number).