Sanyo SCP-4920, User Manual

Page: 80 / 230

Controlling Roaming Charges Using Call Guard
Your phone has two ways of alerting you when you are roaming off
the network provided to you: the onscreen roaming icon and Call
Guard. Call Guard makes it easy to manage your roaming charges by
requiring an extra step before you can place or answer a roaming call.
(This additional step is not required when you make or receive calls
while on the network provided to you.)
To turn Call Guard on or off:
1.
Press to access the main menu.
2.
Select
Settings
and press .
3.
Select
Roaming
and press .
4.
Select
Call Guard
and press .
5.
Select
On
or
Off
and press .
To place roaming calls with Call Guard on:
1.
From standby mode, dial 1 + area code + the seven-digit
number. (You can also initiate a call from the Contacts directory,
Call History, or Messaging.)
2. Press or Speaker (left softkey) (or press Options [right
softkey] and highlight
Call
or
Call:Speaker On
) and press .
3.
Press to proceed while the pop-up message is displayed.
– or –
Press any key to erase the pop-up message, press
Options
(right
softkey), highlight Roam Call , or Roam:Speaker On , and press .
To answer incoming roaming calls with Call Guard on:
䊳
Press Options (right softkey), highlight Answer or
Answer:Speaker
, and press .
– or –
1.
Press or
Speaker
(left softkey).
2.
Press to proceed while the pop-up message is displayed.
Reminder: If the Call Guard feature is set to
On
, you need to take extra steps to
make and receive roaming calls, even if you have selected the
Analog
setting
(see page 68).
Section 2D: Controlling Your Roaming Experience 69