Using the 12-Hour ON and OFF Timer (continued)
A combination of the TIMER ON and TIMER OFF modes, this function allows
you to specify the time that the unit turns on and the time when it turns off.
(Example) The unit will turn on three hours from now, and turn off five hours
from now.
Setting procedure:
•
The display changes immediately to its status previous to timer setting,
but the
or
indication remains.
•
Press the TIMER SET button to display the time remaining on the timer in
seconds.
•
Note that it is not possible to check both the ON and OFF timer settings.
The timer setting that will occur first is given preference and displayed.
The timer setting that will occur first is the one with the shorter time
setting.
Cancellation procedure:
Press the TIMER ON button and TIMER OFF buttons once again.
•
Set the ON and OFF Timers simultaneously.
Unless you set the 12-Hour ON and OFF Timers at the same time, they
may not operate at the specified time.
NOTE
3. ON/OFF Parogram Timer
OI-379-17EG
17
TIMER ON display
during counting
TIMER OFF display during
counting after 3 hours
has elapsed.
Timer setting
Operate
Stop
3 hours
2 hours
5 hours
STEP 1
Use the procedure described in the ‘‘1. TIMER ON mode’’
section on the preceding page to set the timer to turn the
unit on three hours from now.
STEP 2
Use the procedure described in the ‘‘2. TIMER OFF mode’’
section on the preceding page to set the timer to turn the
unit off five hours from now.
SAP-K161~241GJA 3/4/00 16:36pm Page 17
