8
DLS
DLS stands for Dynamic Label Segment which is a scrolling message that the broadcaster may
include in their transmissions. The message usually includes information such as programme details
…etc.
Programme type
This describes the style of the programme that is being broadcast. If the information is not available,
the display will show “<Programme Type>”.
Ensemble/Multiplex (Group name)
The Ensemble/Multiplex is a collection of radio stations that are bundled and transmitted together in a
single frequency. There are national and local multiplexes, local ones contain stations that are
specific to that area.
Note:
Press and hold the
INFO
button for longer than 2 seconds, the software version number will be
displayed.
When you move the radio to another part of the country, your pre-tuned and stored DAB stations may
no longer be available. If this is the case then you will need to reset your radio back to its original
factory settings; to perform a factory reset, please do the following:
1. Plug the radio to mains and press the
STANDBY/ON
button to turn the radio on.
2. Press and hold the
MENU
button until the display shows “Press SELECT to confirm reset”.
3. Release the
MENU
button and press the
SELECT
button once, the display will first show
“Restarting …” and after the reset is completed, the radio will go to standby.
4. Press the
STANDBY/ON
button again to turn the radio on, it will then automatically enter into the
DAB mode and perform auto scan function. After the scan has finished, the radio will select and
display the first alphanumerically found station.
Note:
All of your stored DAB & FM presets will be lost once the reset has taken place.
The brightness of the display is automatically adjusted for the room light conditions. It will be reduced
when the room lighting is turned off so as not to interfere your sleep. The display will brighten
automatically in the daylight or when the room lights are turned on again for better visibility.
Cleaning the unit
Clean the outside of the unit with a clean soft cloth, moistened with lukewarm water. Do not use
benzene, thinners, or alcohol since they will damage the finish of the surfaces.
FACTORY RESET
DISPLAY AUTO DIMMER
MAINTENANCE
SPECIFICATION
POWER SUPPLY :
AC 240V 50Hz
OUTPUT POWER :
0.5 W
FREQUENCY RANGE :
UNIT DIMENSION :
160 (L) x 140 (W) x 50 (H) mm
WEIGHT: 0.6Kg
***SPECIFICATION SUBJECT TO CHANGE WITHOUT FURTHER NOTICE.
~
DAB+ 174.928 - 239.200 MHz
FM 87.50 - 108.00 MHz
