5
F1
F2
Alarm Off
DAB Preset #
FM Preset #
Buzzer Tone #
90 8 0 7 0 60 30 1 0
4. Rotate the
VOLUME/SCROLL
control followed by pressing the
SELECT
button to adjust and
confirm the wake-up mode settings - first set the DAB and FM Preset (1-10), then the Buzzer
Tone (1 or 2) and finally the alarm wake-up Volume level (1-20) . (F. 2)
5.
After the confirmation of the wake-up volume level setting, the wake-up mode settings are
completed and the alarm function is now ready for you to activate.
6.
Repeat the above procedures to set the other Alarm (1 or 2).
Activating the alarm function
1. To activate the alarm function, repeatedly press the
ALARM
button (
1
or
2
), the associated alarm
wake-up mode will be displayed and change in the below sequence on every press:
2. When the display shows your desired alarm wake-up mode, release the button, the alarm function
is now activated and the associated alarm icon will be displayed.
3.
When the alarm time arrives, the selected wake-up mode will be on and the alarm icon in the
display will flash to indicate the alarm is triggered. To stop the alarm sooner, press the
STANDBY/ON
button.
4.
To check the alarm status, press the
ALARM
button (
1
or
2
) once and the associated alarm status
will be displayed.
Note:
If you have activated the alarm function and the wake-up mode is DAB or FM, make sure that the
volume is at a sufficient level for you to hear.
Automatic Alarm Repeat
The alarm will automatically repeat each day at the selected time as long as the alarm icon is
displayed. To cancel this function, repeatedly press the
ALARM
button (
1
or
2
) button until the display
shows “Alarm off”.
When the alarm has triggered, press the
SNOOZE
button will temporary switch off the alarm for 5
minutes, the display will show “ Zz “to indicate snooze on. This is repeatable in the one hour alarm
duration.
Note:
The alarm comes first will have the priority and it would continue for a one hour duration, the
snooze will just switch off this alarm temporary during this duration, so if the second alarm comes in
this period, it will not function. But if the first alarm is switched off before the second alarm arrives,
then the second alarm will be activated.
This function allows you to program the radio to switch off itself after a set period of time.
1. To activate the sleep function, repeatedly press the
SLEEP
button, the display will show “Sleep
Timer” and the time will change in the below sequence on every press:
2. When your desired sleep time appears in the display, release the button and the sleep function
will be activated in two seconds. The display will show “S#” where “S1” is to represent “10
minutes” sleep time and so on.
3.
When the sleep time counts to zero, the unit will go off. To put the sleep function off during sleep
timer on, press the
SLEEP
button once, the display will show “Sleep off”.
4.
To check the sleep timer status, repeatedly press the
INFO
button until you see the sleep timer
information appears in the display.
SNOOZE FUNCTION
SLEEP FUNCTION
