Sanyo PRO-200, User Manual

Page: 17 / 236

Se
tti
n
g
U
p
Se
rv
ice
Setting Up Your Phone
1.
Install the battery (if necessary).
n
Slide the battery cover latch into its unlock position
and slide the battery cover downward to remove it.
n
Insert the battery into the opening, making sure the
connectors align. Gently press down to secure the
battery.
n
Replace the battery cover and press up until you hear
a click. Lock the battery cover by sliding the latch into
its locked position.
2.
Press to turn the phone on.
n
Your phone will turn on, search for Sprint service,
and enter standby mode.
n
If your phone is not yet activated, or if it is locked, see
“Getting Started With Sprint Service”on the
following page for more information.
3.
Make your first call.
n
Use your keypad to enter a phone number.
n
Press .
Note Your phone’s battery should have enough charge to turn on
your phone, find a signal, set up your voicemail, and make a
call. You should fully charge your battery as soon as possible.
See “Charging the Battery”on page 25 for details.
Section 1A: Setting Up Service 3