- 4 -
Mechanical disassemblies
1.
CABINET BACK
CABINET TOP
HOOK
SIGNAL CABLE
AC POWER CORD
Disassemble should be made following procedures in numerical order.
Following steps show the basic procedures, therefore unnecessary step may be ignored.
Caution:
The parts and screws should be placed exactly the same position as the original otherwise it may cause
lose of performance and product safety.
Before disassemblies
When disassemblies a cabinet, always turn off the
Projector and Smoke Resistant Unit.
Confirm that the temperature of Projector cool-off and
implement disassembly.
It removes the connection of the signal cable,AC power
cord and each cables the projector.
CABINET BACK REMOVAL.
Hold the upper surface of the Cabinet- back, and remove
in the direction of the arrow while pressing down.
Note;
Be careful not to damage Hook.
The cabinet-back is being fixed with cabinet top by hook.
Ensure that there is nothing protecting from the table
underneath the Smoke Resistant Unit which may harm the
lower surface and in turn cause damage to the indicator.
Summary of Contents for POA-SP-SU30
Page 16: ......
