Sanyo POA-MD17SDID Instruction Manual Download Page 4

Page: 4 / 4

Connect a cable of BNC signal to the SDI-IN 1 or SDI-IN 2.

Connect the SDI-OUT to other monitor or other projector equipped with HD-SDI or

SD-SDI module card.

■

Connection

Connect to a signal source.

(HD-SDI or SD-SDI signal)

Connect to the monitor or

other projector which is

supported the HD-SDI or

SD-SDI.

SDI IN 1

SDI OUT

SDI IN 2

Summary of Contents for POA-MD17SDID

Page 1: ...erface Signal conforming to the BTA S 004 SMPTE292M standard or the SD D1 SDI signal SD Serial Digital Component Signal conforming to the SMPTE259M C standard into a RGB parallel digital signal This module card is only used for our LCD projector that has a slot for a digital card Contact a sales dealer for suitable projectors 1AA6P1P4380 IDNN Printed in Japan ...

Page 3: ...equipped with a slot for setup Remove 2 screws and pull out the terminal from the projector 2 Put a HD SD SDI module card in along the guide and push in the projector Connect the socket of module card in the terminal socket of the projector firmly Fasten the module with two screws GUIDE SOCKET SCREW MODULE CARD SCREW ...

Page 4: ...ect the SDI OUT to other monitor or other projector equipped with HD SDI or SD SDI module card Connection Connect to a signal source HD SDI or SD SDI signal Connect to the monitor or other projector which is supported the HD SDI or SD SDI SDI IN 1 SDI OUT SDI IN 2 ...