Sanyo POA-MD17SDID Instruction Manual Download

Page: 3 / 4

■

Setup the Module card

This module card connects to the terminal slot of the LCD projector.

1. First, remove a terminal equipped with a slot for setup.

Remove 2 screws and pull out the terminal from the projector.

2. Put a HD&SD-SDI module card in along the guide, and push in the projector.

Connect the socket of module card in the terminal socket of the projector firmly.

Fasten the module with two screws.

GUIDE

SOCKET

SCREW

MODULE CARD

SCREW

Summary of Contents for POA-MD17SDID

Page 1: ...erface Signal conforming to the BTA S 004 SMPTE292M standard or the SD D1 SDI signal SD Serial Digital Component Signal conforming to the SMPTE259M C standard into a RGB parallel digital signal This module card is only used for our LCD projector that has a slot for a digital card Contact a sales dealer for suitable projectors 1AA6P1P4380 IDNN Printed in Japan ...

Page 3: ...equipped with a slot for setup Remove 2 screws and pull out the terminal from the projector 2 Put a HD SD SDI module card in along the guide and push in the projector Connect the socket of module card in the terminal socket of the projector firmly Fasten the module with two screws GUIDE SOCKET SCREW MODULE CARD SCREW ...

Page 4: ...ect the SDI OUT to other monitor or other projector equipped with HD SDI or SD SDI module card Connection Connect to a signal source HD SDI or SD SDI signal Connect to the monitor or other projector which is supported the HD SDI or SD SDI SDI IN 1 SDI OUT SDI IN 2 ...