25
System Menu (Video/S-Video)
If the projector cannot reproduce a proper video image, select
a specific broadcast signal format from among PAL, SECAM,
NTSC, NTSC 4.43, PAL-M, and PAL-N.
Video or S-Video
Component 1 or Component 2
The projector automatically detects the incoming video system
and adjusts itself to optimize its performance.
When the video system is PAL-M or PAL-N, select the system
manually.
Use the Point
!
buttons to select the Input Menu and
press the Point
or OK buttons to access the submenu
items.
Use the Point
!
buttons to select an input source and
press the Point
or OK buttons. The selected item is check
marked.
1
2
When the video signal is connected to the VIDEO or S-VIDEO
jacks, select Video or S-video respectively.
Menu Operation
Input Menu
When the video signal is connected to the Y-Pb/Cb-Pr/Cr jacks,
select Component 1 or Component 2.
The projector automatically detects the incoming video signal and
adjusts itself to optimize its performance.
3
When “Video” or “S-video” is selected, press the Point
button to display the System Menu.
4
Use the Point
!
buttons to select the desired system and
press the OK or Point
buttons.
Video
Input
Auto
The currently set item
is check marked.
Press the Point
button
to display the System
Menu.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
5
When “Computer” is selected, press the Point
button to
display the Source Select Menu.
6
Use the Point
!
buttons to select the desired source and
press the OK or Point
buttons.
Use the Point
!
buttons
to select the desired
system and press the OK
or Point
buttons.
Quit
Exit this menu.
Input
