Sanyo PLV-HD10, Service Manual

Page: 50 / 178

- 50 -
D
Integrator lens
Slot part comes
this top side.
Lens should be placed as
the rugged surface side
comes to the Holder side.
Rugged surface
side
Printed marker
Comes this top side
G
Optical filter(WV)
LCD panel
Film attached
side
E
Glass should be placed as the
film attached side comes to the
LCD panel side.
(Polarized glasses and optical
filter glasses)
Lamp side
F
Optical filter (UV cut)
Chamfer partcomes
this position
A : The printed marker comes this surface side. (Fig.31)(Fig.33)
B : Plane surface comes this side. (Fig.34)
C : Spherical surface comes this side. (Fig.35)
D : Slot part comes this side. (Fig.36)
E : Glass should be placed the film attached side comes to the LCD panel side. (Fig.37)
F : Large chamfer corner comes this top side. (Fig.38)
G : The printed marker comes this top side, and Glass should be placed the film attached side comes to the
LCD panel side (Optical filters WV). (Fig.37)(Fig.39)
H : The printed marker comes always to the position of the figure (Dichroic mirror). (Fig.31)
I : Film attached side comes to the this side (PBS). Slot part comes this side. (Fig.40)(Fig.36)
Spherical surface
C
The printed marker comes
this side. (non spherical surface)
Relay lens(out)
Printed marker
A
Optical filter, mirror
Flat surface
B
Condenser lens(out)
Fig.33
Fig.34
Fig.35
Fig.38
Fig.36
Fig.39
Fig.37
Lens should be placed as
the rugged surface side
comes to the Holder side.
Slot part comes
this top side.
Rugged surface side
Film attached side comes
to the this side.
I
PBS
Fig.40