38
Computer Input
Press the SELECT button to display the Display area dialog box.
Select the resolution at the Display area dialog box.
Display area
Adjust the horizontal area displayed by this LCD Projection Monitor.
Press the Point Left / Right button to decrease / increase value and
then press the SELECT button.
Display area H
Adjust the vertical area displayed by this LCD Projection Monitor.
Press the Point Left / Right button to decrease / increase value and
then press the SELECT button.
Display area V
Reset
Store
To store adjusted data, select Store and press the Point Right button.
The dialog box will appear and choose one of 5 modes and then press
the SELECT button.
To reset the adjusted data, select Reset and press the Point Right
button. A confirmation box will appear and then select [Yes]. All
adjustments return to their previous figures.
Mode free
Vacant Mode
Show the values of “Total
dots,” “Horizontal,” “Vertical,”
“Display area H,” and “Display
area V.”
Close this dialog box.
To store adjusted data
To clear adjusted data
To clear adjusted data previously set, select Mode free and press the
Point Right button. The dialog box will appear and choose one of 5
modes and then press the SELECT button.
This Mode has parameters being stored.
NOTE:
●
Display area and Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p,
720p, or 1080i is selected in the Computer System Selection. (p35)
Select Store to store the
adjusted data.
When selecting Display area,
this dialog box appears.
