Sanyo PLC-XW20A, Service Manual

Page: 11 / 40

-11-
■
Adjustment
Normal Mode Service Mode
"MENU"
"IMAGE"
"POWER
ON/OFF"
Adjustment item
Adjustment deta value
Service Mode
"Point Up / Down"
" / -"
137 10
Computer
"Point Left / Right"
Service Mode
137 10
Computer
■
SERVICE ADJUSTMENT MENU OPERATION
■
To enter service mode
To enter service mode press the "MENU" and "IMAGE"
buttons on the projector simultaneously and hold for 2
seconds. As shown in a figure, a service mode display
appears on a screen.
■
Adjustment
Adjust service data using the following control buttons.
1. "POINT UP" ------- An item number increases.
2. "POINT DOWN" -- An item number decreases.
3. "POINT RIGHT" -- An adjustment value increases.
""
4. "POINT LEFT" ---- An adjustment value decreases.
"VOLUME - "
■
To exit service mode
Press the "POWER on/off" button only once on the projec-
tor or remote control unit to quit the service mode.
TP-STG1
TP-R1
TP-66A
TP-G1
TP-B1
VR5601
ASSY PWB MAIN
TEST POINTS LOCATION
■
LOCATION OF TEST POINT AND VR