Sanyo PLC-XU58, Service Manual

Page: 29 / 108

-29-
26 Real/Cinema GAMMA 10 506/522 0 ~ 1023
27 Real/Cinema GAMMA 11 506/517 0 ~ 1023
28 Real/Cinema GAMMA 12 507/514 0 ~ 1023
29 Real/Cinema GAMMA 13 512/514 0 ~ 1023
30 Real/Cinema GAMMA 14 512/512 0 ~ 1023
31 Real/Cinema GAMMA 15 512/527 0 ~ 1023
Group 100 H8 Option
0 Lamp Time Monitor 0~8738 Read Only
1 RS232C Baudrate 0 0 ~ 1 0: 19200bps1: 9600bps
2
3
Cooling Time L1 3 1 ~ 15 Fan Mode L1 Cooling time1:30 sec.3:90 sec.15:450 sec.(change in 30 sec. steps)
4 Hi-Land SW 0 0 ~ 3 0: Normal Mode1~3: High-Land Mode 1-3
5
6
Lamp Total Time 0~65535 Read only
7 Net Board Reset 0 0 ~ 1 Not used
8
9
Reset SW 0 ~ 10 Resets User Setting data when this value is set to 10
10 Color Shading SW 1 0 ~ 1 0:Color Compensation Off, 1:Color Compensation On
11 RC Enable/Disable 0 0 ~ 3 0:Enable 1:Disable
12 Lamp Dim Level 15 0 ~ 15
13 Lamp Warning Time 0~65535
14
15
Video Mute Forced Off 0 ~ 1 0:VideoMuteOn(Normal) 1:Video Mute Forced Off
16 Safety FAN Control Fix SW 0 0 ~ 5 0:Normal 1:Normal Min2:Normal Max3:Eco Min4:Eco Max
17 HDCP Option 0 0 ~ 1 0: XGA, 1: other tha XGA
18 HDCP Reset 0 0 ~ 10 Write EDID data for HDCP when the value becomes 10.
19
20
Coooling Time L2 4 1 ~ 15 Fan Mode L2 Cooling time1:30 sec.3:90 sec.15:450 sec.(change in 30 sec. steps)
Group: 101PW Option
0 Shootout Mode 0 0 ~ 1 1: Shoot Out Mode Enable0: Disable
1 V-Sync SW 0 0 ~ 1 0: No Sync 1: Sync with Vertical sync
2 NOBRAND 0 0 ~ 1 0:Normal1:NOBRAND
4 HDCP OverScan Rate 0 0 ~ 5
6 VSBEG 2 0 ~ 15
Group 103 Auto Keystone
0 Offset 0 -1053 ~ 1056 Offset (1/64 degree) display
1 Offset Switch 0 0 ~ 1 0: Offset display (Normal) 1: Offset display (Calibration error)
2 Debug Mode 0 0 ~ 1 0: No diaplay 1: Angle(0.5 degree)
3 Service Calibration 0 0 ~ 5 When value is set to 5, the auto-setup is performed.
4 Lock Count 5 1 ~ 255 Calibration times
5 Delta Vart Result 64 1 ~ 255 Threshold of calibration
6 Angle 1 Count 1 0 ~ 10 Caluculate times (No6 x No7)
7 Angle 2 Count 5 0 ~ 10 Caluculate times (No6 x No7)
8 Bli
n
d Sector 1 160 0 ~ 1024 No sens band 1 (in 1/64 degree), data converted to 0
9 Blind Sector 2 32 0 ~ 1024 No sens band 2 (in 1/64 degree), data converted to value of No. 10.
10 Blind Sector Bias 61 0 ~ 1024 Bias (in 1/64 degree).
Group: 105 Custom Mode
0 Scale Retention Enable 0 0 ~ 1 0: Standard, 1: Keep Scale
1 Horizontal Scale 1024 512 ~ 3072 Horizontal scale adjustment
2 Vertical Scale 768 384 ~ 2304 Vertical scale adjustment
3 Horizontal Scale Offset 16380 0 ~ 32760 Horizontal position adjustment
4 Vertical Scale Offset 16380 0 ~ 32760 Vertical position adjuustment
5 OSD Offset retention Enable 0 0 ~ 1 0: Standard, 1:Keep OSD position
6 Horizontal OSD Offset 0 0 ~ 254 Horizonta position for OSD
7 Vertical OSD Offset 0 0 ~ 190 Vertical Psosition for OSD
Group: 110 Dimmer Processing
0 DIMMER_CTRL_LEVEL1 7 0~255 Dimmer Brightness Level1 Data: Dimmer Level1 when less than this value.
1 DIMMER_CTRL_LEVEL2 14 0~255 Dimmer Brightness Level2 Data: Dimmer Level2 when less than this value.
2 DIMMER_CTRL_LEVEL3 21 0~255 Dimmer Brightness Level3 Data: Dimmer Level3 when less than this value.
3 DIMMER_CTRL_LEVEL4 28 0~255 Dimmer Brightness Level4 Data: Dimmer Level4 when less than this value.
4 DIMMER_CTRL_LEVEL5 35 0~255 Dimmer Brightness Level5 Data: Dimmer Level5 when less than this value.
5 DIMMER_CTRL_LEVEL6 42 0~255 Dimmer Brightness Level6 Data: Dimmer Level6 when less than this value.
6 DIMMER_CTRL_LEVEL7 49 0~255 Dimmer Brightness Level7 Data: Dimmer Level7 when less than this value.
7 DIMMER_CTRL_LEVEL8 56 0~255 Dimmer Brightness Level8 Data: Dimmer Level8 when less than this value.
8 DIMMER_CTRL_LEVEL9 63 0~255 Dimmer Brightness Level9 Data: Dimmer Level9 when less than this value.
9 DIMMER_CTRL_LEVEL10 70 0~255 Dimmer Brightness Level10 Data: Dimmer Level10 when less than this value.
10 DIMMER_CTRL_LEVEL11 77 0~255 Dimmer Brightness Level11 Data: Dimmer Level11 when less than this value.
11 DIMMER_CTRL_LEVEL12 84 0~255 Dimmer Brightness Level12 Data: Dimmer Level12 when less than this value.
12 DIMMER_CTRL_LEVEL13 91 0~255 Dimmer Brightness Level13 Data: Dimmer Level13 when less than this value.
13 DIMMER_CTRL_LEVEL14 98 0~255 Dimmer Brightness Level14 Data: Dimmer Level14 when less than this value.
14 DIMMER_CTRL_LEVEL15 105 0~255 Dimmer Brightness Level15 Data: Dimmer Level15 when less than this value.
15 DIMMER_AVERAGE_POINT 4 1 ~ 16 Average count for Dimmer Brightness Data
16 DIMMER_AVERAGE_DATA - 0 ~ 255 Average Value for Dimmer Brightness Data * Read Only(8 bit)
17 DIMMER_LEVEL_AUTO - 0 ~ 15 Dimmer Level effective in auto-dimmer mode. 0 fixed other than auto mode (Read Only)
18 DIMMER_LEVEL_NONAUTO - 0 ~ 15 Dimmer Level effective other than auto-dimmer mode
Group: 111 Fan Control
0 FAN_TEMP_A_WARNING 54 30 ~ 100 Temperature A to judge the abnormal temperature, for surrounding temperature
1 FAN_TEMP_B_WARNING 57 30 ~ 100 Temperature B to judge the abnormal temperature, for Panels
No. Adjustment Item Initial Value Range Input source / Description
Electrical Adjustments