Sanyo PLC-XU355A - 3500, Owner'S Manual

Page: 115 / 144

11
Creating a program file [Program Editor]
Network Viewer 5 (Program Editor) is a tool to make a program file which specifies the display order
of the images and its file path in the file server (FTP server). The Program Editor creates a folder
"DispParam" at the login root directory in the FTP server, and files with each program name into
this folder. These files are called "Program". By specifying the program file with the Network Viewer
function, you can display the images in programmed order with the projector .
Procedure of making program
1
To start up the Program Editor, click "Network Viewer 5 (Program
Editor)" menu from "Start" - "All Programs" - "Network Viewer &
Capture 5" menu.
2
Click
Connect
button.
3
If the connection setting window appears, enter the each item and
then click
OK
button.
The setting window disappears and then the programs are
listed on the window if there are program files at the login
directory in the connected FTP server.
IMPORTANT
It is required to set the write permission mode for the login directory of the FTP server.
In the read only mode, you will have an error when you register a new program.
Item Description
Host name ................Enter the FTP server name or IP address
Root Folder ..................... Specify the root directory of the FTP server. Normally use "/".
User ID ....................... Enter your login account of the FTP sever or use blank when you login as anonymous account
for the FTP server
Password................... Enter your password (PIN code) or use blank when you login as anonymous account.
Creating a program file [Program Editor]