Sanyo PLC-XU301A, Owner'S Manual

Page: 38 / 79

3
Video Input
Choose
Computer 1(Component)
or
Computer 1(Scart)
by pressing the INPUT button on the top control or
press the COMPONENT button or the COMPUTER 1 on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described
below.
1
Input Menu
Use the Point
▲▼
buttons to select
Computer 1
and
then press the Point
►
button.
Input Source Selection (Component, RGB Scart 1-pin)
When the input source is coming from video
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a
Component-VGA Cable, select
Component
.
Component
When the input source is coming from video
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a Scart-
VGA Cable, select
RGB (Scart)
.
RGB (Scart)
Direct Operation
Menu Operation
Press the MENU button to display the On-Screen
Menu. Use the Point
▲▼
buttons to select
Input
and
then press the Point
►
or the SELECT button.

Note:
When the Input Search function is set to
On1
or
On
,
the input signal will be searched automatically (p.45).
COMPUTER 1 button
Top Control Remote Control
3
Use the Point
▲▼
buttons to select
Component
or
RGB(Scart)
and then press the SELECT button.
RGB(PC digital)
RGB(PC digital)
Computer 1(RGB)
Computer 1(Scart)
INPUT button
COMPONENT button
Component
Video
Computer (PC digital) /
(AV HDCP) /
(Analog)
S-video
Computer 1 ( RGB)
/(Component) / (Scart)