Sanyo PLC-XU301, Owner'S Manual

Page: 125 / 169

46
Chapter 5 Appendix
Use of telnet
You can control the projector by using the telnet application *1 installed on your computer.
Normally, the telnet application is available on your computer.
* The telnet 10000 port is used to control the projector.
Control
(For example, in case of using the telnet
application of
Windows XP Professional .)
1. Select Run... submenu from Start menu
on the computer. Type "telnet" onto the
Open text area on the displayed window
and press OK button.
2. The telnet application will start and the following window will be displayed. Type as
below to connect the projector.
> open 192.168.1.201 10000 [return]
* Use the IP address assigned to the projector.
(For example, in case of using the telnet
application of
Mac OS X v 10.4 )
1. Select Terminal from Applications
--> Utilities .
Type as below on the displayed window.
> telnet [return]