Sanyo PLC-XU115, Service Manual, Page: 39 / 128

-39-
Electrical Adjustments
Group/
Item
Item Name Function Initial range Note
B-LCCOM 345 0-511
3 R-LCCOM-Gain 189 0-55
4 G-LCCOM-Gain 189 0-55
5 B-LCCOM-Gain 189 0-55
6 R-LCCOM-Bright 0 0-55
7 G-LCCOM-Bright 0 0-55
8 B-LCCOM-Bright 0 0-55
9 R-LCCOM-Cent 16 0-63
10 G-LCCOM-Cent 16 0-63
11 B-LCCOM-Cent 16 0-63
1 R-ENBX-PW 11 0-17
13 G-ENBX-PW 11 0-17
14 B-ENBX-PW 11 0-17
15 R-DXIN 8 0-55 Link with No.18
16 G-DXIN 8 0-55 Link with No.19
17 B-DXIN 8 0-55 Link with No.0
18 R-CLXIN 8 0-55 Link with No.15
19 G-CLXIN 8 0-55 Link with No.16
0 B-CLXIN 8 0-55 Link with No.17
1 R-ENBX1IN 0-55
G-ENBX1IN 0-55
3 B-ENBX1IN 0-55
Group102 : Auto Keystone Setup Value
0 OFFSET 0
-1056 -
1056
1 OFFSET SWITCH
0
0 - 1
DEBUG MODE 0 0 - 1
3 SERVICE CALIBRATION 0 0 - 1
4 LOCK COUNT
5
1 - 55
5 DELT VERT RESULT
64
1 - 55
6 ANGLE 1 COUNT 1 1 - 10
7 ANGLE COUNT 5 1 - 10
8 BLIND SECTOR 1
160
0 - 104
9 BLIND SECTOR 3
3
0 - 104
10 BLIND SECTOR BIAS
61
0 - 104
Group
200
option
0 Logo Prohibition (Forced No
Brand)
Logo Prohibition (0: Menu, 1: Forced,
: China, 3-9: not used)
0 0 - Effective after AC On
1 RS3C Baudrate Baud Rate 0 0 -
0: 1900bps, 1: 9600bps, :
11500bps
PJLink Enable PJLink 0 0 - 1 0: Disable 1: Enable
3 Shipping Setting 0 0 - 0
Default set when the value is set to
10
4 CABLE SW Long Cable 0 0 - 10 0: Disable, 1: Enable
5 PW Debug Command
Enable
0 0 - 1
0:Disable (Serial Command Eanble)
1: Enable (PW Debug Mode)
6 Device Refresh Disable 0 0 - 1
0:Enable, 1:Disable
No last memory
7 Device Access Disable 0 0 - 1
0:Enable (Normal), 1:Disable
No last memory
0 Projector Time Reset 0 0 - 0
Projector Time is cleared when the
value is set to 10
1 Lamp Warning Time
(NORMAL)
Lamp Life at Normal Mode (Warning
Time at Normal)
500 -
8000
Lamp Warning Time (ECO)
Lamp Life at Eco Mode (Warning
Time at Eco)
500 -
8000
3 Lamp Warning Time (HIGH) Lamp Life at High Mode (Warning
Time at High)
500 -
8000
30 Lamp life test enable
0:Disable 1:Enable, for safety test
only
31 Lmap On time(for life test) For test purpose
3 Lamp Off time(for life test) For test purpose
33 Lamp total time(for life test) For test purpose
40 PreScaler n/a 0-55 n/a
41 Htime n/a 0-65535 n/a
50 Lamp Replacement Display Lamp Warning Display On / Off 1 0 - 1 1: On, 0: Off
51 Filter Warning Display Filter Warning Display On / Off 1 0 - 1 1: On, 0: Off
5 Lamp Counter reset Times Reset Times of Lamp Counter 0 0 - 55 Read only
54 Factory Default Execute
Times
Reset times of Fanctory Default 0 0 - 55 Read only