-11-
Security Function Notice
Anititheft Alarm Function Disable
This projector provides an Antitheft alarm function which
works when detecting a vibration to protect the projector
from a suspicious person.
release the alarm setting
Press the
F
button
and input the four-digit PIN code
within 10 seconds. (default PIN code "1111") When the
alarm is released, you will hear high-pitched confirma-
tion sound.
When inputting an incorrect PIN code, you will hear low-
pitched sound. If you input incorrect PIN codes 3 times,
the alarm will start ringing.
If you forget the PIN code to release the alarm setting,
press and hold the
button 3
and
F button
at the same
time for more than 3 seconds.
rear control
F button button 1, 2, 3
This projector provides security functions such as "Key lock", "PIN code lock" and "Logo PIN code lock". When the pro-
jector has set these security function on, you are required to enter correct PIN code to use the projector. If you do not
know the correct PIN code to the projector, the projector can no longer be operated or started. In this case, you must
reset those function first according to the resetting procedure described below and then check up on the projector.
Resetting procedure
1
Disconnect the AC power cord from the AC outlet.
2
As pressing the
SeLect
button on the projector, connect the AC power cord into an AC outlet again. Keep
pressing the
SeLect
button until the POWER indicator lights continuously.
This is complete the resetting of the security function. The PIN code lock and Logo PIN code lock are reset as
the initial PIN code at the factory and the Key lock function is disabled.
Please refer to the owner's manual for further information of the security functions.
Function
description
Key lock
Locks operation of the top control or the remote con-
trol.
If the Key lock is enabled with top control lock, the pro-
jector can no longer be started.
Initial setting: Key lock function is disabled
PIN code lock
Prevents the projector from being operated by an un-
authorized person.
Initial code: “1234”
Logo PIN code lock
Prevents an unauthorized person for changing the
start-up logo and captured image on the screen.
Initial code: “4321”
Security Function Disable
Summary of Contents for PLC-XU110
