Sanyo PLC-XU07N Owner'S Manual Download | Manualshive

Page: 21 / 40

background image

21

BASIC OPERATIONS

Turning on the Projector

Connect the projector's AC power cord into a wall outlet. The
LAMP POWER indicator lights RED, and the READY indicator
lights GREEN.

Press the power ON-OFF button on the Remote Control Unit or on
the Top Control to ON. The LAMP POWER indicator dims, and
the Cooling Fans start to operate. The Preparation Display
appears on the screen and the count-down starts. The signal
from the source appears after 30 seconds.

2

3

Turning off the Projector

Press the power ON-OFF button on the Remote Control Unit or on
the Top Control, and the message "Power off?" appears on the
screen.

Press again the power ON-OFF button to turn off the projector.
The LAMP POWER indicator lights bright and the READY
indicator turns off. The Cooling Fans operate for 90 seconds after
the projector is turned off. (During this "Cooling Down" period, this
appliance cannot be turned on.)

1

2

TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU TURN IT ON, WAIT AT LEAST 5 MINUTES
BEFORE TURNING IT OFF.

Power off?

The message disappears after 4 seconds.

TURNING ON / OFF THE PROJECTOR

When the TEMPERATURE WARNING indicator flashes red, the projector is automatically turned off. Wait
at least 5 minutes before turning the projector on again.

If the TEMPERATURE WARNING indicator continues to flash, follow procedures below:
1. Disconnect the AC power cord from the AC outlet.
2. Check the air filters for dust accumulation.
3. Clean the Air Filter. (See "AIR FILTER CARE AND CLEANING" section on page 33.)
4. Press the power ON-OFF button to ON.

If the TEMPERATURE WARNING indicator still continues to flash, call your authorized dealer or service
station.

1

Complete the peripheral connections (with Computer, VCR, and
etc.) before turning on the projector. (Refer to "CONNECTING TO
THE PROJECTOR" on Pages 10~15 for connecting those
equipment.

3

When the cooling the projector has finished, the READY indicator
turns to green again and you can turn the projector on. To power
down completely, disconnect the AC power cord.

30

The Preparation Display disappears after 30 seconds.

NOTE : The Cooling Fan may work for cooling while the projector is turned off. When the Cooling Fan is

working, TEMPERATURE WARNING INDICATOR flashes red.

«
...
19
20
21
22
23
...
»

Summary of Contents for PLC-XU07N









































Reviews:

No comments

Related manuals for PLC-XU07N

Brand: 3M Pages: 64

Brand: Panasonic Pages: 11

Brand: hager Pages: 2

Brand: Madrigal Imaging Pages: 138

Brand: OPTRONIC Pages: 10

ZEB-PixaPlay 26

Brand: Zebronics Pages: 13

Brand: ricoo Pages: 8

Horizon Electrol

Brand: Da-Lite Pages: 8

Brand: SurgeAssure Pages: 4

bestView ADF-3200A

Brand: A&D Pages: 23

Brand: Tripp Lite Pages: 12

Brand: Hitachi Pages: 4

Brand: Hitachi Pages: 22

X807 - CP XGA LCD Projector

Brand: Hitachi Pages: 119

X308 - CP XGA LCD Projector

Brand: Hitachi Pages: 228

X807 - CP XGA LCD Projector

Brand: Hitachi Pages: 232

X308 - CP XGA LCD Projector

Brand: Hitachi Pages: 228

Brand: Hitachi Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands