27
Choose either
Computer 1(RGB)
or
Computer 2(RGB)
by pressing the COMPUTER 1 or Computer 2 button
on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described
below.
1
Input Menu
2
3
Computer Input
COMPUTER 1 button
Note:
When the Input Search function is set to
On1
or
On2
in
the Auto setup function, the input signal will be searched
automatically (p.44).
Computer
1
Remote Control
Direct Operation
Menu Operation
Press the MENU button to display the On-Screen
Menu. Use the Point
▲▼
buttons to select
Input
and
then press the Point
►
or the SELECT button.
Use the Point
▲▼
buttons to select
Computer 1
.
When
Computer 1
is selected, press the Point
►
button to access the submenu items. Use the Point
▲
▼
buttons to select the RGB input source and then
press the SELECT button.
Computer 1(RGB)
Computer 1(Scart)
Input Source Selection (RGB: Computer 1/Computer 2)
Computer 2 (RGB)
COMPUTER 2 button
Summary of Contents for PLC-XR301 - XGA Projector With 3000 Lumens
Page 77: ...KR5AC SANYO Electric Co Ltd ...
