Sanyo PLC--XP200L, Service Manual

Page: 29 / 154

-9-
Disassembly requires a .0mm or .5mm hex wrench and a slot screwdriver.
Optical Parts Disassembly
1 Projection lens removal
1 Set the projection lens to center position with lens shift
function.
Press and hold the release button on the cabinet front
cover and slide it in the arrow direction as shown in the
figure and open it.
3 Remove the light block plate upward off.
4 Slide the lens lock lever A on the projector to “UN-
LOCK” (UPPER) position and remove the Projection
Lens ass’y off.
Note : When making unlocking, attach your hand to pre-
vent the lens fall.
Lever A
Release button
Light block plate