Sanyo PLC-XL50A, Service Manual

Page: 55 / 126

- 55 -
Service Adjustment
Group/
Item
Item Name Function Initial Range Note
3 Shipping Setting 0 0 - 20 Default set when the value is set to 10
4 CABLE SW Long Cable 0 0 - 1 0: Disable, 1: Enable
5 PW Debug Command Enable 0 0 - 1
0:Disable (Serial Command Eanble)
1: Enable (PW Debug Mode)
6 Device Refresh Disable 0 0 - 1
0:Enable, 1:Disable
No last memory
7 Device Access Disable 0 0 - 1
0:Enable (Normal), 1:Disable
No last memory
30 Lamp life test enable 0:Disable 1:Enable, for safety test only
31 Lmap On time(for life test) For test purpose
32 Lamp Off time(for life test) For test purpose
33 Lamp total time(for life test) For test purpose 0 - 255
40 Lamp PWM PresAv 50Hz Lamp PWM PRES0 setting (AV 50Hz) 0 - 255
41 Lamp PWM PresAv 60Hz Lamp PWM PRES0 setting (AV 60Hz) 0 - 255
42 Lamp PWM PresUnlock Lamp PWM PRES0 setting 0 - 255
43 Lamp PWM PresPcA Lamp PWM setting (PC-A) 0 - 255
44 Lamp PWM PresPcB Lamp PWM setting (PC-B) 0 - 255
45 Lamp PWM PrefAv50Hz Lamp PWM PREF0 setting (AV 50Hz) 0 - 65535
46 Lamp PWM PrefAv60Hz Lamp PWM PREF0 setting (AV 60Hz) 0 - 65535
47 Lamp PWM PrefUnlock Lamp PWM PREF0 setting 0 - 65535
50 Lamp Replacement Display Lamp Warning Display On / Off 1 0 - 1 1: On, 0: Off
51 Filter Warning Display Filter Warning Display On / Off 1 0 - 1 1: On, 0: Off
52 Lamp Counter reset Times Reset Times of Lamp Counter 0 0 - 255 Read only
53 Filter Counter Reset Time Reset Times of Filter Counter 0 0 - 255 Read only
54 Factory Default Execute Times Reset times of Fanctory Default 0 0 - 255 Read only
56 Menu Position Move menu (X asis) 0 0 - 1024
57 Menu Position Move menu (Y asis) 0 0 - 1024
59 Source Search Enable Source Search 0 0 - 1 0:Disable 1: Enable
60 Language Default setting Shippig data setting (Language) -
70 RC Mode Setting RC Mode 0 0 - 1
0: Normal RC Mode
1: Promethean RC Mpde
71 Force Model Option Model Option Force Setting 0 0 - 2
0: Normal 1: Force for XE50 2: Force for
XL50
80 Panel life test mode Setting panel life test mode 1 0 - 1 0: Life test mode 1: Normal
Group 201 Option (signal)
0 FrameLock Option 1 0 - 1
0: FrameLockOFF at PC signal
1: FrameLockON at PC signal and 47Hz
(Vfreq) ~ Panel frequency of input
signal
1 AV TRUE Change AV Signal True 0 0 - 1 0:Disable 1: Enable
2 Field Sense Invert Enable 0 0 - 1
Reverse Processing of FLDINVSetting
Value
0: Disable - Used FLDINV Setting Value
1: Enable - Used Reversed FLDINV
Setting Value
3
4 Sub Image Enable 1 0 - 1
0:Disable (Service Adjustment Dsiable,
Used all the Center Values
1:Enable (Service Adjustment Enable)
6 Zoom Accelerator Enable 0 0 - 1
0:Zoom Accelerator OFF,
1:Zoom Accelerator ON
No last memory
7 DZoom Reset by Keystone 0 0 - 1
0:Enable (Normal), 1:Disable (Dzoo
is not cancelled even if Keystone is
cancelled)
No last memory
8 Stability Count Count Value of V-missing 5 0 - 255
9 Sensivity for Signal Lost
(HSYNC)
Only used this value for No Signal
Judgement(Hz)
350
0 -
32757
10 Sensivity for Signal Lost
(VSYNC)
Only used this value for No Signal
Judgement(Line)
3 0 - 255
11 Keystone Filter Center Value Reference Value 16 0 - 30
Group 202 Option (Uniformity Adjust FPGA)
0 FPGA Version FPGA Version No. Read only
1 ON/OFF Setting for Uniformity Adjust ON/OFF 1 0 - 1 0 : OFF, 1 : ON
2 MODE FPGA Table No. 0 0 - 3 0 : TBL0, 1 : TBL1, 2 : TBL2
3 SEL
Setting for Uniformity Adjust
calculation
1 0 - 1
0 : Output=Input x (KH+KV)/2
1 : Output=Input x (KH+KV)
4 HANTEN Setting for Adress reverse 0 0 - 3
0:Normal, 1: R/L reverse, 2: UP/Down
reverse, 3: R/L, UP/Down reverse
5 Red Gain Setting for Red Gain 128/92/128/92/128 0 - 255
Normal/Red/Blue/Yellow/Green 6 Green Gain Setting for Ged Gain 128/120/120/94/118 0 - 255
7 Blue Gain Setting for Bed Gain 128/128/106/128/128 0 - 255