23
Basic Operation
Adjust the lens focus with the focus lever.
Focus Lever
• The arrows are white when there is no correction.
• The direction of the arrow which are being corrected
turns red.
• The arrows disappear at the maximum correction.
• If you press the KEYSTONE button on the top control
or on the remote control once more while the
keystone dialog box is being displayed, the keystone
adjustment is canceled.
• The adjustable range can be limited depending on the
input signal.
• The projected picture may fluctuate momently
depending on the keystone adjustment.
• “Keystone” dissappears after 4 seconds.
If a projected picture has keystone distortion, correct the
image with the Keystone function.
Press the KEYSTONE button on the top control or on the
remote control. The keystone dialog box appears. Correct
keystone distortion with the Point
ed
buttons. Keystone
adjustment can be stored (p.42).
Reduce the upper width
with the Point
e
button.
Reduce the lower width
with the Point
d
button.
Keystone Correction
Remote Control
KEYSTONE button
POINT
ed
buttons
Focus Adjustment
Top Control
KEYSTONE
button
ON
-
OFF
POWER
KEYST
ONE
INPUT
WARNING LAMP REPLACE
MENU
- VOLUME
+ VOLUME
SELECT
POINT
ed
buttons