6
5. Mechanism and Function of the Warp& Blending
6. Start up Advanced Screen Manager
1. First, turn on a projector, then turn on a computer.
2.Select Warp & Blending input (INPUT-4 or INPUT-5) as an input source on the pro
jector, then project an image.
3. Start Advanced Screen Manager from program start menu of the computer.
The DIGITAL image signal which was input into DVI-D terminal (compatible with
HDCP) of Warp & Blending Board is projected after editing for the spherical or curved
screen.
Advanced Screen Manager edits images. The image data which was edited by
Advanced Screen Manager is sent from SERIAL terminal of the pc to SERIAL PORT
IN terminal of Warp & Blending Board, then Warp & Blending Board starts editing
image based on the received data.
SERIAL PORT OUT on the Warp & Blending Board output the signal input from SERI-
AL PORT IN. When projecting Warp & Blending image with several projectors, con-
nect SERIAL PORT OUT to the next projector.
You can give the identified codes to each projector to control all of them individually.
Installation of the Advanced Screen Manager
Mechanism and Function of the Warp& Blending
How to Start the Software
4. Installation of the Advanced Screen Manager
Install the program.
1. Insert the Program CD-ROM into a CD-ROM Drive of a PC.
2. Open My computer and double click CD-ROM Drive. Then open Tool folder and
double click the set-up icon.
3. Select English for the installation and press the "OK" button.
4. Installation starts and License Agreement will appear. (CAUTION; READ THE
LICENSE AGREEMENT CAREFULLY) If you agree, click "Yes".
5. Specify the folder to install the program.
6. After completing installation, Warp & Blender will be registered in the program
start-up menu.
7. If you want to delete the program, operate from "Add and delete application" in the
control panel.
