26
STEP-2 Image Editing
LEVEL1 = Offset figure outside edge of the screen. (1-15)
LEVEL2 = Set the position level set by the POINT. (1-16)
POINT = Set the point position of LEVEL 2. Set the position to locate which percent-
age from the screen edge. See the figure on the next page for setting each
part. Refer to the chart on the next page.
You can also set the figure with dialog by selecting "Blending setting (B)" in
the "Setting (O)" menu.
16 Step editing
1. Drag the lines or Xa, Xb, Ya, Yb on the editing screen and adjust the overlapped
width of the images. Each line shows the following screen position.
Xa = Left width of the screen, Xb = Right width of the screen,
Ya = Top width of the screen ,Yb = Bottom width of the screen.
2. Adjust the offset level and layer linearity of the overlapped parts of the screen.
Click the each circle dot on the screen to display the offset and layer linearity set-
ting dialog.
