Sanyo PLC-XE33 Owner'S Manual Download

Page: 20 / 77

TO MAINTAIN THE LIFE OF THE LAMP, ONCE

YOU TURN THE PROJECTOR ON, WAIT AT

LEAST FIVE MINUTES BEFORE TURNING IT

OFF.

Power off?

disappears after 4 seconds.

Turning Off the Projector

Press the ON/STAND-BY button on the top control or

on the remote control, and

Power off?

appears on the

screen.
Press the ON/STAND-BY button again to turn off the

projector. The POWER indicator starts to blink red, and

the cooling fans keep running. (You can select the level

of fans’ quietness and speed. See “Fan” on page 55.)

At this time, you can unplug the AC power cord even if

the fans are still running.

When the projector has cooled down enough, the

POWER indicator stops blinking and you can turn on

the projector.



Note:

• When the On start function is set to

, the projector will

be turned on automatically by connecting the AC power

cord to an AC outlet (p.50).

• The running speed of cooling fans is changed according

to the temperature inside the projector.

• Do not put the projector in a case before the projector is

cooled enough.

• If the WARNING indicator blinks or lights red, see

“WARNING indicator” on page 58.

• While the POWER indicator is blinking, the lamp is being

cooled down and the projector cannot be turned on. Wait

until the POWER indicator stops blinking to turn on the

projector again.

• The fan rotation will terminate directly if the AC power

cord is unplugged immediately after the projector is

turned off.

• The projector can be turned on after the POWER

indicator turns red. The waiting time to restart will be

shortened when the normal power-off processing for fan

cooling is completed, compared with the time the AC

power cord is immediately unplugged after the power-

off.

Basic Operation

DO NOT OPERATE THE PROJECTOR

CONTINUOUSLY WITHOUT REST.

CONTINUOUS USE MAY RESULT IN

SHORTENING THE LAMP LIFE. TURN OFF THE

PROJECTOR AND LET STAND FOR ABOUT AN

HOUR IN EVERY 24 HOURS.

Downloaded From projector-manual.com Sanyo Manuals

Summary of Contents for PLC-XE33














































































Search results

Summary of Contents for PLC-XE33

Reviews:

Related manuals for PLC-XE33

Brands by name

Popular brands

Sanyo PLC-XE33, Owner'S Manual

Search results

Summary of Contents for PLC-XE33

Reviews:

Related manuals for PLC-XE33

Brands by name

Popular brands