1
Chapter 3 Basic Operation
Displaying all the status information of the target
Select a target and click
button on the tool bar. The following status window appears
and displays all the available status information of the target.
0
The target name and item which have an
abnormality or connection error happen-
ing are indicated with red.
0
When PJ Network Manager cannot
acquire the value of column information,
"---" is displayed.
Stopping monitoring the target
To stop monitoring the target, click
button again on the tool bar.
0
The projectors setting different network passwords cannot be set to the same group. It is
necessary for the projectors in the same group to set to the same password.
0
The above procedure can perform by selecting
Target display
from
Display
menu.
Setting the target group
The target group can be set up by the procedure below. When you set a command in the
same group, you set it.
1
Select targets which you want to set from the status list. Select
Group setting
from
Target
menu, the dialog box will appear as the below figure.
2
Select a group, and then click
OK
button.
0
"
---
" will not set the group.
